Table of Contents

 

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

 


 

Form 10-Q

 

Quarterly Report Pursuant to Section 13 or 15(d)

of the Securities Exchange Act of 1934

 

For the quarterly period ended June 30, 2010

 

Commission File Number

0-04041

 


 

ALLIED MOTION TECHNOLOGIES INC.

Incorporated Under the Laws of the State of Colorado

 

Colorado

 

84-0518115

(State or other jurisdiction of

 

(I.R.S. Employer

incorporation or organization)

 

Identification No.)

 

23 Inverness Way East, Suite 150

Englewood, Colorado 80112

Telephone:  (303) 799-8520

 

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past ninety (90) days.  Yes x  No o

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit and post such files).  Yes o  No o

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

 

Large accelerated filer o

 

Accelerated filer o

 

 

 

Non-accelerated filer o

 

Smaller reporting company x

(Do not check if a smaller reporting company)

 

 

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes o  No x

 

Number of Shares of the only class of Common Stock outstanding:  7,905,844 as of August 16, 2010.

 


 

 

 



Table of Contents

 

ALLIED MOTION TECHNOLOGIES INC.

INDEX

 

 

 

 

Page No.

 

 

 

 

 

 

 

 

PART I. FINANCIAL INFORMATION

 

 

 

 

 

 

Item 1.

Financial Statements

 

 

 

 

 

 

 

Unaudited Condensed Consolidated Balance Sheets June 30, 2010 and December 31, 2009

1

 

 

 

 

 

 

Unaudited Condensed Consolidated Statements of Operations For the three and six months ended June 30, 2010 and 2009

2

 

 

 

 

 

 

Unaudited Condensed Consolidated Statements of Cash Flows For the six months ended June 30, 2010 and 2009

3

 

 

 

 

 

 

Unaudited notes to Condensed Consolidated Financial Statements

4

 

 

 

 

 

Item 2.

Management’s Discussion and Analysis of Financial Condition and Results Of Operations

9

 

 

 

 

 

Item 3.

Quantitative and Qualitative Disclosures about Market Risk

18

 

 

 

 

 

Item 4.

Controls and Procedures

18

 

 

 

 

PART II.

OTHER INFORMATION

 

 

 

 

 

 

Item 6.

Exhibits

19

 



Table of Contents

 

ALLIED MOTION TECHNOLOGIES INC.

CONDENSED CONSOLIDATED BALANCE SHEETS

(In Thousands, except per share data)

(Unaudited)

 

 

 

June 30,
2010

 

December 31,
2009

 

Assets

 

 

 

 

 

Current Assets:

 

 

 

 

 

Cash and cash equivalents

 

$

5,327

 

$

4,470

 

Trade receivables, net of allowance for doubtful accounts of $227 and $225 at June 30, 2010 and December 31, 2009, respectively

 

10,228

 

7,743

 

Inventories, net

 

8,223

 

7,578

 

Deferred income taxes

 

496

 

476

 

Prepaid expenses and other

 

983

 

891

 

Total Current Assets

 

25,257

 

21,158

 

Property, plant and equipment, net

 

6,447

 

6,584

 

Deferred income taxes and other

 

5,644

 

5,649

 

Intangible assets, net

 

939

 

1,362

 

Total Assets

 

$

38,287

 

$

34,753

 

 

 

 

 

 

 

Liabilities and Stockholders’ Investment

 

 

 

 

 

Current Liabilities:

 

 

 

 

 

Debt obligations

 

 

600

 

Accounts payable

 

6,083

 

3,135

 

Accrued liabilities and other

 

3,751

 

3,298

 

Income taxes payable

 

527

 

104

 

Total Current Liabilities

 

10,361

 

7,137

 

Pension and post-retirement obligations

 

2,504

 

2,594

 

Total Liabilities

 

12,865

 

9,731

 

 

 

 

 

 

 

Commitments and Contingencies

 

 

 

 

 

Stockholders’ Investment:

 

 

 

 

 

Common stock, no par value, authorized 50,000 shares; 7,905 and 7,585 shares issued and outstanding at June 30, 2010 and December 31, 2009, respectively

 

18,783

 

18,581

 

Preferred stock, par value $1.00 per share, authorized 5,000 shares; no shares issued or outstanding

 

 

 

Retained earnings

 

7,230

 

5,757

 

Accumulated other comprehensive (loss) income

 

(591

)

684

 

Total Stockholders’ Investment

 

25,422

 

25,022

 

Total Liabilities and Stockholders’ Investment

 

$

38,287

 

$

34,753

 

 

See accompanying notes to financial statements.

 

1



Table of Contents

 

ALLIED MOTION TECHNOLOGIES INC.

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS

(In Thousands, except per share data)

(Unaudited)

 

 

 

For the three months ended
June 30,

 

For the six months ended
June 30,

 

 

 

2010

 

2009

 

2010

 

2009

 

Revenues

 

$

19,998

 

$

13,940

 

$

37,420

 

$

29,235

 

Cost of products sold

 

14,452

 

11,593

 

27,469

 

24,099

 

Gross margin

 

5,546

 

2,347

 

9,951

 

5,136

 

 

 

 

 

 

 

 

 

 

 

Operating costs and expenses:

 

 

 

 

 

 

 

 

 

Selling

 

1,012

 

802

 

1,953

 

1,680

 

General and administrative

 

2,361

 

1,651

 

4,418

 

3,376

 

Engineering and development

 

927

 

990

 

1,940

 

1,985

 

Amortization of intangible assets

 

160

 

258

 

325

 

513

 

Fire related losses

 

 

51

 

 

107

 

Insurance recoveries

 

 

(51

)

(685

)

(107

)

Impairment charges

 

 

15,986

 

 

15,986

 

Total operating costs and expenses

 

4,460

 

19,687

 

7,951

 

23,540

 

Operating income (loss)

 

1,086

 

(17,340

)

2,000

 

(18,404

)

 

 

 

 

 

 

 

 

 

 

Other expense (income), net:

 

 

 

 

 

 

 

 

 

Interest expense

 

 

20

 

3

 

35

 

Writeoff of deferred finance costs

 

 

86

 

 

86

 

Other expense (income), net

 

15

 

125

 

(138

)

106

 

Total other expense (income), net

 

15

 

231

 

(135

)

227

 

Income (loss) before income taxes

 

1,071

 

(17,571

)

2,135

 

(18,631

)

(Provision) Benefit for income taxes

 

(332

)

5,456

 

(662

)

5,786

 

 

 

 

 

 

 

 

 

 

 

Net income (loss)

 

$

739

 

$

(12,115

)

$

1,473

 

$

(12,845

)

 

 

 

 

 

 

 

 

 

 

Basic net income (loss) per share:

 

 

 

 

 

 

 

 

 

Net income (loss) per share

 

$

0.09

 

$

(1.60

)

$

0.19

 

$

(1.71

)

Basic weighted average common shares

 

7,856

 

7,594

 

7,811

 

7,490

 

 

 

 

 

 

 

 

 

 

 

Diluted net income (loss) per share:

 

 

 

 

 

 

 

 

 

Net income (loss) per share

 

$

0.09

 

$

(1.60

)

$

0.19

 

$

(1.71

)

Diluted weighted average common shares

 

7,869

 

7,594

 

7,819

 

7,490

 

 

2



Table of Contents

 

ALLIED MOTION TECHNOLOGIES INC.

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

(In Thousands)

(Unaudited)

 

 

 

For the six months ended
June 30,

 

 

 

2010

 

2009

 

Cash Flows From Operating Activities:

 

 

 

 

 

Net income (loss)

 

$

1,473

 

$

(12,845

)

Adjustments to reconcile net income (loss) to net cash provided by (used in) operating activities:

 

 

 

 

 

Depreciation and amortization

 

968

 

1,811

 

Deferred income taxes

 

68

 

(5,956

)

Impairment charges

 

 

15,986

 

Provision for Excess and Obsolete Inventory

 

78

 

675

 

Other

 

37

 

296

 

Changes in assets and liabilities:

 

 

 

 

 

Trade receivables

 

(2,737

)

1,817

 

Inventories, net

 

(866

)

669

 

Prepaid expenses and other

 

16

 

(28

)

Accounts payable

 

3,035

 

(926

)

Accrued liabilities and other

 

720

 

(2,144

)

Net cash provided by (used in) operating activities

 

2,792

 

(645

)

 

 

 

 

 

 

Cash Flows From Investing Activities:

 

 

 

 

 

Purchase of property and equipment

 

(602

)

(418

)

Cash paid for acquisition, net of cash acquired

 

(76

)

 

Net cash used in investing activities

 

(678

)

(418

)

 

 

 

 

 

 

Cash Flows From Financing Activities:

 

 

 

 

 

Repayments on lines-of-credit, net

 

(600

)

 

Repayments on term loans

 

 

(400

)

Stock transactions under employee benefit stock plans

 

80

 

230

 

Net cash used in financing activities

 

(520

)

(170

)

 

 

 

 

 

 

Effect of foreign exchange rate changes on cash

 

(737

)

(1

)

 

 

 

 

 

 

Net increase (decrease) in cash and cash equivalents

 

857

 

(1,234

)

 

 

 

 

 

 

Cash and cash equivalents at beginning of period

 

4,470

 

4,196

 

 

 

 

 

 

 

Cash and cash equivalents at end of period

 

$

5,327

 

$

2,962

 

 

See accompanying notes to financial statements.

 

3



Table of Contents

 

ALLIED MOTION TECHNOLOGIES INC.

 

1.     Basis of Preparation and Presentation

 

Allied Motion Technologies Inc. (the Company) is engaged in the business of designing, manufacturing and selling motion control products to a broad spectrum of customers throughout the world.

 

The accompanying unaudited condensed consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries.  All significant inter-company accounts and transactions have been eliminated in consolidation.

 

The assets and liabilities of the Company’s foreign subsidiaries are translated into U.S. dollars using exchange rates in effect at the balance sheet date.  Revenues and expenses are translated at average rates prevailing during the month of the transaction.  The resulting translation adjustments are included in the cumulative translation adjustment component of stockholders’ investment in the accompanying consolidated balance sheets.  Transaction gains and losses that arise from exchange rate fluctuations on transactions denominated in a currency other than the functional currency are included in the results of operations as incurred.

 

The condensed consolidated financial statements included herein have been prepared by the Company pursuant to the rules and regulations of the Securities and Exchange Commission and include all adjustments which are, in the opinion of management, necessary for a fair presentation. Certain information and footnote disclosures normally included in financial statements which are prepared in accordance with accounting principles generally accepted in the United States of America (“U.S. GAAP”) have been condensed or omitted pursuant to such rules and regulations.  The Company believes that the disclosures herein are adequate to make the information presented not misleading.  The financial data for the interim periods may not necessarily be indicative of results to be expected for the year.

 

The preparation of financial statements in accordance with U.S. GAAP requires management to make certain estimates and assumptions.  Such estimates and assumptions affect the reported amounts of assets and liabilities as well as disclosure of contingent assets and liabilities at the date of the consolidated financial statements, and the reported amounts of revenue and expenses during the reporting period.  Actual results could differ from those estimates.

 

It is suggested that the accompanying condensed interim financial statements be read in conjunction with the Consolidated Financial Statements and related Notes to such statements included in the Annual Report on Form 10-K for the year ended December 31, 2009 that was previously filed by the Company.

 

2.     Inventories

 

Inventories, valued at the lower of cost (first-in, first-out basis) or market, are as follows (in thousands):

 

 

 

June 30,
2010

 

December 31,
2009

 

Parts and raw materials

 

$

6,924

 

$

6,484

 

Work-in process

 

2,328

 

1,649

 

Finished goods

 

1,114

 

1,620

 

 

 

10,366

 

9,753

 

Less reserves

 

(2,143

)

(2,175

)

Inventories, net

 

$

8,223

 

$

7,578

 

 

4



Table of Contents

 

3.     Property, Plant and Equipment

 

Property, plant and equipment is classified as follows (in thousands):

 

 

 

June 30,
2010

 

December 31,
2009

 

Land

 

$

290

 

$

290

 

Building and improvements

 

3,238

 

3,231

 

Machinery, equipment, tools and dies

 

11,749

 

11,806

 

Furniture, fixtures and other

 

1,756

 

1,543

 

 

 

17,033

 

16,870

 

Less accumulated depreciation

 

(10,586

)

(10,286

)

Property, Plant and Equipment, net

 

$

6,447

 

$

6,584

 

 

4.     Stock-Based Compensation

 

Stock Incentive Plans

 

The Company’s Stock Incentive Plans provide for the granting of stock awards, including stock options, stock appreciation rights and restricted stock, to employees and non-employees, including directors of the Company.

 

Stock Options

 

The following is a summary of option activity, during the six months ended June 30, 2010:

 

 

 

Number
of Shares

 

Weighted
Average
Exercise
Price

 

Weighted
Average
Remaining
Contractual
Term (years)

 

Aggregate
Intrinsic
Value

 

Outstanding at beginning of period

 

538,950

 

$

4.44

 

1.2

 

 

 

Forfeited

 

(4,000

)

$

4.87

 

 

 

 

 

Exercised

 

(45,000

)

$

1.77

 

 

 

 

 

Outstanding at end of Period

 

489,950

 

$

4.68

 

0.8

 

$

106,000

 

 

 

 

 

 

 

 

 

 

 

Exercisable at end of period

 

489,950

 

$

4.68

 

0.8

 

$

106,000

 

 

All stock options are fully vested, and the Company did not recognize any compensation expense relating to outstanding stock options during 2010 or 2009.

 

Stock Warrants

 

As of June 30, 2010, the Company had 300,000 warrants outstanding to purchase common stock that are exerciseable at an exercise price of $4.41. The warrants were issued May 10, 2004, in connection with an acquisition, and will expire May 10, 2011.

 

Restricted Stock

 

In the six months ended June 30, 2010, 286,305 shares of unvested restricted stock were awarded with a weighted average value of $3.34.   Of the restricted shares granted, 102,120 shares have performance based vesting conditions.  The value at the date of award is amortized to compensation expense over the related service period, which is generally three years. Shares of

 

5



Table of Contents

 

restricted stock are forfeited if an employee leaves the Company before the vesting date. Shares that are forfeited become available for future awards.

 

The following is a summary of restricted stock activity during the six months ended June 30, 2010:

 

 

 

Number of
Shares

 

Outstanding at beginning of period

 

173,712

 

Granted

 

286,305

 

Forfeited

 

(866

)

Vested

 

(75,920

)

Outstanding at end of Period

 

383,231

 

 

During the quarters ended June 30, 2010 and 2009, compensation expense, net of forfeitures, of $106,000 and $82,000 was recorded, respectively.    During the six-months ended June 30, 2010 and 2009, compensation expense, net of forfeitures, of $214,000 and $169,000 was recorded, respectively.

 

5.     Earnings per Share

 

Basic income per share is computed by dividing net income by the weighted average number of shares of common stock outstanding.  Diluted income per share is determined by dividing the net income by the sum of (1) the weighted average number of common shares outstanding and (2) if not anti-dilutive, the effect of stock awards determined utilizing the treasury stock method.  The dilutive effect of outstanding awards for the quarters ended June 30, 2010 and 2009 was 13,000 and 0 shares, respectively. The dilutive effect of outstanding awards for the six months ended June 30, 2010 and 2009 was 8,000 and 0 shares, respectively.  Stock awards and warrants to purchase 562,000 and 803,000 shares of common stock were excluded from the calculation of diluted income per share for the quarters ended June 30, 2010 and 2009, respectively, since the results would have been anti-dilutive.  Stock awards and warrants to purchase 714,000 and 803,000 shares of common stock were excluded from the calculation of diluted income per share for the six months ended June 30, 2010 and 2009, respectively, since the results would have been anti-dilutive.

 

6.     Segment Information

 

ASC Topic “Segment Reporting” requires disclosure of operating segments, which as defined, are components of an enterprise about which separate financial information is available that is evaluated regularly by the chief operating decision maker in deciding how to allocate resources and in assessing performance.

 

The Company operates in one segment for the manufacture and marketing of motion control products for original equipment manufacturers and end user applications. In accordance with the “Segment Reporting” Topic of the ASC, the Company’s chief operating decision maker has been identified as the Chief Executive Officer and President, which reviews operating results to make decisions about allocating resources and assessing performance for the entire Company. Existing guidance, which is based on a management approach to segment reporting, establishes requirements to report selected segment information quarterly and to report annually entity-wide disclosures about products and services, major customers, and the countries in which the entity holds material assets and reports revenue. All material operating units qualify for aggregation

 

6



Table of Contents

 

under “Segment Reporting” due to their similar customer base and similarities in: economic characteristics; nature of products and services; and procurement, manufacturing and distribution processes. Since the Company operates in one segment, all financial information required by “Segment Reporting” can be found in the accompanying consolidated financial statements and within this note.

 

The Company’s wholly owned foreign subsidiaries, Premotec (Dordrecht, The Netherlands), and Allied Motion Canada (Waterloo, Ontario, Canada), are included in the accompanying consolidated financial statements.  Financial information related to the foreign subsidiaries is summarized below (in thousands):

 

 

 

As of and
for the three
months ended
June 30,

 

As of and
for the six
months ended
June 30,

 

 

 

2010

 

2009

 

2010

 

2009

 

 

 

 

 

 

 

 

 

 

 

Revenues derived from foreign subsidiaries

 

$

6,612

 

$

4,532

 

$

12,540

 

$

9,122

 

Identifiable assets

 

$

12,323

 

$

8,743

 

$

12,323

 

$

8,743

 

 

Sales to customers outside of the United States by all subsidiaries were $7,914,000 and $5,973,000 during the quarters ended June 30, 2010 and 2009, respectively, and $15,424,000 and $12,383,000 for the six months ended June 30, 2010 and 2009, respectively.

 

During the quarters ended June 30, 2010 and 2009, no single customer accounted for more than 10% of total revenues.

 

7.     Comprehensive Income (Loss)

 

Comprehensive income (loss) is defined as the change in equity of a business enterprise during a period from transactions and other events and circumstances from non-owner sources.  It includes all changes in equity during a period except those resulting from investments by and distributions to stockholders.

 

Comprehensive income (loss) is computed as follows (in thousands):

 

 

 

For the three months
ended June 30,

 

For the six months
ended June 30,

 

 

 

2010

 

2009

 

2010

 

2009

 

Net income (loss)

 

$

739

 

$

(12,115

)

$

1,473

 

$

(12,845

)

Foreign currency translation adjustment

 

(772

)

460

 

(1,275

)

(26

)

Comprehensive income (loss)

 

$

(33

)

$

(11,655

)

$

198

 

$

(12,871

)

 

7



Table of Contents

 

8.     Intangible Assets

 

Intangible assets on the Company’s consolidated balance sheets consist of the following (in thousands):

 

 

 

June 30,
2010

 

December 31,
2009

 

Estimated
Life

 

Amortizable intangible assets

 

 

 

 

 

 

 

Customer lists

 

$

2,848

 

$

3,008

 

8 years

 

Trade name

 

946

 

946

 

10 years

 

Design and technologies

 

1,050

 

1,212

 

8 years

 

Patents

 

24

 

24

 

 

 

Accumulated amortization

 

(3,929

)

(3,828

)

 

 

Total intangible assets

 

$

939

 

$

1,362

 

 

 

 

Amortization expense for intangible assets was $160,000 and $258,000 for the quarters ended June 30, 2010 and 2009, respectively, and $325,000 and $513,000 for the six months ended June 30, 2010 and 2009, respectively.

 

9.     Debt Obligations

 

Debt obligations consisted of the following (in thousands):

 

 

 

June 30,
2010

 

December 31,
2009

 

Credit Agreement (at variable rates)

 

 

 

 

 

Revolving line-of-credit

 

$

 

$

600

 

 

The Company amended the Credit agreement on July 30, 2010, to extend the maturity date through October 29, 2010.  The Company’s amended Credit Agreement provides revolving credit up to $8 million and €2 million.  The amended Credit Agreement contains certain financial covenants related to achieving minimum EBITDA levels, maintaining minimum consolidated tangible net worth, and placing a ceiling on the amount of capital expenditures incurred by the Company.  The Company was in compliance with all covenants at June 30, 2010.

 

The Company also has €300,000 of available borrowings under a bank overdraft facility in Europe.

 

10.  Restructuring Reserves

 

As of June 30, 2010, the restructuring activity related to the relocation of the Company’s encoder operations was completed with no remaining reserves.  An immaterial amount of expenses were incurred in excess of the reserve.  No additional activity is expected to occur.

 

11.  Fire Loss and Insurance Recoveries

 

In the first quarter of 2010, the Company received the final settlement for the business interruption losses caused by the fire at the COPI facility in October 2008, formerly located in Chatsworth, CA.  Net insurance recoveries were $0 for the quarters ended June 30, 2010 and 2009,

 

8



Table of Contents

 

and $685,000 and $0, for the six months ended June 30, 2010 and 2009, respectively.  As a result of the settlement, no additional losses or recoveries are expected.

 

12.  Acquisition

 

On June 3, 2010, the Company completed the purchase of Agile Systems Inc. (Agile), a privately owned Canadian corporation. The Company purchased the shares of Agile and the purchase price was paid in cash at closing.  On June 15, 2010, Agile was amalgamated into Allied Motion Canada, Inc., the acquiring company.  Allied Motion Canada is not expected to have a negative impact on the Company’s liquidity position.  Allied Motion Canada’s operations, from the date of acquisition, and balance sheet are included in the Condensed Consolidated Statement of Operations for the three and six months ended June 30, 2010 and the Condensed Consolidated Balance Sheet as of June 30, 2010, respectively.

 

13.  Reclassifications

 

Certain prior year balances were reclassified to conform to the current year presentation.  Those reclassifications had no impact on net income, stockholders’ investment or cash flows from operations as previously reported.

 

Item 2.    Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

All statements contained herein that are not statements of historical fact constitute “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements include, without limitation, any statement that may predict, forecast, indicate, or imply future results, performance, or achievements, and may contain the word “believe,” “anticipate,” “expect,” “project,” “intend,” “will continue,” “will likely result,” “should” or words or phrases of similar meaning. Forward-looking statements involve known and unknown risks and uncertainties that may cause actual results of the Company to differ materially from the forward-looking statements. The risks and uncertainties include those associated with the present economic circumstances in the United States and throughout Europe, general business and economic conditions in the Company’s motion markets, introduction of new technologies, products and competitors, the ability to protect the Company’s intellectual property, the ability of the Company to sustain, manage or forecast its growth and product acceptance, success of new corporation strategies and implementation of defined critical issues designed for growth and improvement in profits, the continued success of the Company’s customers to allow the Company to realize revenues from its order backlog and to support the Company’s expected delivery schedules, the continued viability of the Company’s customers and their ability to adapt to changing technology and product demand, the loss of significant customers or enforceability of the Company’s contracts in connection with a merger, acquisition, disposition, bankruptcy, or otherwise, the ability of the Company to meet the technical specifications of its customers, the continued availability of parts and components, increased competition and changes in competitor responses to the Company’s products and services, changes in government regulations, availability of financing, the ability of the Company’s lenders and financial institutions to provide additional funds if needed for operations or for making future acquisitions or the ability of the Company to obtain alternate financing if present sources of financing are terminated, the ability to attract and retain qualified personnel who can design new applications and products for the motion industry, the ability of the Company to identify and consummate favorable acquisitions to support external growth and new technology, the ability of the Company to establish low cost region manufacturing and component sourcing capabilities, and the ability of the Company to control costs, including relocation costs, for the purpose of improving profitability. The Company’s ability to compete in this market depends upon its capacity to anticipate the need for new products, and to continue to design and market those products to meet customers’ needs in a competitive world. Actual results, events and performance may differ materially. Readers are cautioned not to place undue reliance on these

 

9



Table of Contents

 

forward-looking statements as a prediction of actual results. The Company has no obligation or intent to release publicly any revisions to any forward looking statements, whether as a result of new information, future events, or otherwise.

 

New risk factors emerge from time to time and it is not possible for management to predict all such risk factors, nor can it assess the impact of all such risk factors on its business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements. The Company’s expectations, beliefs and projections are expressed in good faith and are believed to have a reasonable basis; however, the Company makes no assurance that expectations, beliefs or projections will be achieved.

 

Overview

 

Allied Motion is engaged in the business of designing, manufacturing and selling motor, servo motion and optical encoder products to a broad spectrum of customers throughout the world. Examples of the end products using Allied Motion’s technology in the medical and health care industries include wheel chairs, scooters, stair lifts, patient lifts, patient handling tables and beds, electric powered surgical hand pieces, programmable pumps to meter and administer infusions associated with chemotherapy, pain control and antibiotics; nuclear imaging systems, automated pharmacy dispensing equipment, kidney dialysis equipment, respiratory ventilators and heart pumps. In electronics, our products are used in the handling, inspection, and testing of components and in the automation and verification of final products such as PC’s, game equipment and cell phones. Our motors are used in the HVAC systems of trucks, buses, RV’s, boats and off-road construction/farming equipment. These motors operate a variety of actuation systems (e.g., lifts, slide-outs, covers etc.), they provide improved fuel efficiency while the vehicles are idling and are used in drive-by-wire applications to electrically replace or power-assist a variety of mechanical linkages. Our products are also utilized in high performance vehicles, vehicles using alternative fuel systems such as LPG, fuel cell and hybrid vehicles. Our geared motor products are utilized in commercial grade floor cleaners, polishers and material handling devices for factories and commercial buildings. Our products are also used in a variety of military/defense applications including inertial guided missiles, mid range munitions systems, weapons systems on armed personnel carriers and in security and access control in camera systems, door access control and in airport screening and scanning devices. Other end products utilizing our technology include high definition printers; tunable lasers and spectrum analyzers for the fiber optic industry; processing equipment for the semiconductor industry, as well as ticket and cash dispensing machines (ATM’s).

 

Allied Motion is organized into five companies, or technology units (“TUs”): Emoteq Corporation, Motor Products Corporation, Stature Electric, Inc., Precision Motor Technology B.V. (“Premotec”) and Allied Motion Canada, Inc. (formerly Agile Systems, Inc.).

 

The TUs offer a wide range of standard and customized motors, encoders and drives for original equipment manufacturers (OEM) and end user applications. A particular strength of each company is its ability to design and manufacture high quality custom motion control solutions to meet the needs of its customers.  With the addition of Agile, which specializes in controls, the Company will continue to expand its product offerings, providing more integrated motion system solutions to its customers.

 

The Company has made considerable progress in implementing its corporate strategy, with the driving force of “electro-magnetic, mechanical and electronic motion technology/know how”. The Company’s commitment to Allied’s Systematic Tools, or AST for short, is driving continuous improvement in quality, delivery, cost and growth. AST utilizes a tool kit to effect desired changes through well defined processes such as Strategy Deployment, Target Marketing, Value Stream Mapping, Material Planning, Standard Work and Single Minute Exchange of Dies.

 

10



Table of Contents

 

Outlook

 

Despite the challenges Allied Motion faced in 2009 as a result of the economic downturn, the Company returned to profitability in the second half of 2009 and continued to improve profitability in the first six months of 2010. Conditions have continued to improve and management continues its efforts to foster additional growth in revenues and profitability. Bookings in the second quarter were the largest in the history of the Company since the company began focusing strictly on the motion control markets in 2002, at $27.7 million, breaking the previous quarterly orders high of $26.2 million, which occurred in the first quarter of 2010.  Bookings increased by $14.5 million in the quarter ended June 30, 2010, when compared to approximately $13.2 million in the second quarter of 2009.  Bookings for the six months ended June 30, 2010 were $53.9 million, an increase of $23.8 million over the $30.1 million of bookings for the same period last year.  The increased backlog levels provide a good indication that the Company’s served markets are recognizing the value of the Company’s motion solutions and are further enhanced by the economic recovery experienced during the last twelve months.

 

As announced in the fourth quarter of 2009, the Company relocated its COPI encoder business from Chatsworth, California to the Emoteq facilities in Tulsa, Oklahoma.  The Company believes that the combined entity, supporting both the motor and encoder technologies in a cohesive systems approach within the same facility, will provide the best opportunity for long term sustainable growth in sales and profitability in the future.

 

On June 3, 2010, the Company acquired the shares of Agile Systems Inc.  Agile is a leader in the design and development of advanced motion control technology including integrated power electronics, digital controls and network communications for motor control and power conversion.  Agile, based in Waterloo, Ontario, Canada, has established customers in a wide range of industries.  Agile is now known as Allied Motion Canada.

 

The Company has a strong balance sheet, and improved liquidity when compared with the previous year.  The Company’s cash position, net of outstanding debt, increased by approximately $4.8 million over the last twelve months. The Company continues its position of maintaining resources in electro-magnetic, mechanical and electronic design capabilities, as its primary goal is to provide products that “raise the bar” with customers and provide important differentiating solutions against competition. Management will continue to make investments in the markets believed to provide the most opportunity for continued growth and profitability of the Company.

 

One of the Company’s major challenges is to maintain and improve price competitiveness. The Company’s customers are continually being challenged by their markets and competitors to be price competitive and they are requiring their suppliers to deliver the highest quality product at the lowest price possible. Currently, the Company is producing some of its motor sub-assemblies and finished products at sub-contract manufacturing facilities in China and Slovakia. The Company has increased efforts to identify opportunities where production in low cost regions can improve profitability while delivering the same high quality products.

 

The Company’s products contain certain metals, and at certain times the Company experiences significant fluctuations in the costs of these metals, particularly copper, steel and zinc, which are all key materials in our products. The Company has reacted by aggressively sourcing material at lower cost from Asian markets and by passing on surcharges and price increases to our customers.

 

The Company continues to pursue aggressive motor and drive development plans for new products that leverage the combined technology base of the Allied Motion companies. The Company focuses on new product designs that design-out cost, provide higher level, value-added performance solutions and that meet the needs of its served markets. Over the last few years, the Company announced several new motor designs targeted at various markets. It normally takes twelve months to get new products designed into new customer applications.

 

11



Table of Contents

 

The Company continues its focus on a ONE TEAM sales force to more effectively leverage resources utilizing a company wide sales organization. With the ONE TEAM sales force selling all the Company’s products, management’s expectation is that this capability provides opportunities to increase sales from existing customers and secure new business opportunities.

 

Management believes the strategy we have developed for the Company will accomplish our long term goals of increasing shareholder value through the continued strengthening of the foundation necessary to achieve growth in sales and profitability.

 

Operating Results

 

Quarter Ended June 30, 2010 compared to Quarter Ended June 30, 2009

 

 

 

For the three months ended
June 30,

 

Increase (decrease)

 

(in thousands)

 

2010

 

2009

 

$

 

%

 

 

 

 

 

 

 

 

 

 

 

Revenues

 

$

19,998

 

$

13,940

 

$

6,058

 

43

%

Cost of products sold

 

14,452

 

11,593

 

2,859

 

25

%

Gross margin

 

5,546

 

2,347

 

3,199

 

136

%

Gross margin percentage

 

28

%

17

%

 

11

%

 

 

 

 

 

 

 

 

 

 

Operating costs and expenses:

 

 

 

 

 

 

 

 

 

Selling

 

1,012

 

802

 

210

 

26

%

General and administrative

 

2,361

 

1,651

 

710

 

43

%

Engineering and development

 

927

 

990

 

(63

)

(6

)%

Amortization of intangible assets

 

160

 

258

 

(98

)

(38

)%

Fire related losses

 

 

51

 

(51

)

(100

)%

Insurance recoveries

 

 

(51

)

51

 

(100

)%

Impairment charges

 

 

15,986

 

(15,986

)

(100

)%

Total operating costs and expenses

 

4,460

 

19,687

 

(15,227

)

(77

)%

Operating income

 

1,086

 

(17,340

)

(18,927

)

(1192

)%

Interest expense

 

 

20

 

(20

)

(100

)%

Writeoff of deferred finance costs

 

 

86

 

86

 

(100

)%

Other expense, net

 

15

 

125

 

(110

)

(88

)%

Income (loss) before income taxes

 

1,071

 

(17,571

)

18,642

 

106

%

(Provision) Benefit for income taxes

 

(332

)

5,456

 

(5,788

)

(106

)%

Net income (loss)

 

$

739

 

$

(12,115

)

$

12,854

 

106

%

 

NET INCOME (LOSS)    The Company reported net income of $739,000 or $0.09 per diluted share for the second quarter of 2010, as opposed to a net loss of $12,115,000 or $1.60 per diluted share for the second quarter of 2009.  The net loss for last year includes a total of $15,986,000 ($11,105,000 after tax) of asset impairment charges and $600,000 ($417,000 after tax) of additional inventory reserves.

 

EBITDA, BEFORE IMPAIRMENT CHARGES    EBITDA was $1,543,000 for the second quarter of 2010 compared to an EBITDA, before Impairment charges,  loss of $647,000 for the same quarter last year.

 

12



Table of Contents

 

EBITDA, net of Impairment charges is a non-GAAP measurement that consists of income before interest expense, provision for income taxes, depreciation and amortization and impairment charges.  See information included in “Non - GAAP Measures” below for a reconciliation of net income to EBITDA, net of Impairment charges.

 

REVENUES    Revenues were $19,998,000 in the quarter ended June 30, 2010 compared to $13,940,000 for the quarter ended June 30, 2009.  The 43% increase in revenues for the quarter ended June 30, 2010 reflects increased sales into nearly all markets, with the vehicle and industrial markets accounting for the largest portion of increased sales over the quarter ended June 30, 2009.  We continue to utilize our low cost region operations to ensure we are globally competitive on a cost basis while maintaining the same high technical and commercial standards we have already established.

 

Sales to U.S. customers accounted for 60% of our sales in the second quarter of 2010 and 57% in the second quarter of 2009, with the balance of sales to customers primarily in Europe, Canada and Asia.  Sales volumes increased by 46%, partially offset by the strengthening of the U.S dollar against the Euro, which decreased the Company’s sales by 3%.

 

ORDER BACKLOG    At June 30, 2010, order backlog was approximately $36,800,000 which is up 49% from the same time last year and up 75% from the backlog at December 31, 2009.

 

GROSS MARGINS    Gross margin as a percentage of revenues was 28% and 17% for the quarters ended June 30, 2010 and 2009, respectively.  The 11% increase in gross margin is primarily a result of increased sales with minimal changes to fixed overhead costs and a reduction in material and variable manufacturing overhead costs.  In addition, inventory adjustments that occurred in the second quarter of 2009 reduced gross margins by 4% for the quarter ended June 30, 2009, while there was no impact on gross margin for inventory adjustments in the same period for 2010.

 

SELLING EXPENSES   Selling expenses in the second quarter were $1,012,000 compared to $802,000 for the second quarter last year.  The 26% increase is primarily due to the Company increasing its Sales team, as well as higher sales incentives as a result of increased sales.

 

GENERAL AND ADMINISTRATIVE EXPENSES   General and administrative expenses were $2,361,000 in the quarter ended June 30, 2010 compared to $1,651,000 in the quarter ended June 30, 2009.  The 43% increase is primarily a result of increased compensation expense, which includes incentive bonuses.

 

ENGINEERING AND DEVELOPMENT EXPENSES   Engineering and development expenses were $927,000 in the second quarter of 2010 and $990,000 in the same quarter last year.  We continue to maintain strong engineering capabilities to meet our customers’ needs and to expand our product base for future opportunities.

 

AMORTIZATION OF INTANGIBLE ASSETS   Amortization of intangible assets expense was $160,000 in the quarter ended June 30, 2010 and $258,000 in the same quarter last year.  The 38% decrease is primarily the result of the impairment that was recognized on certain intangible assets in the second quarter of 2009 and other intangible assets that became fully amortized in 2009.

 

INCOME TAXES   Provision for income taxes was $332,000 for the second quarter of 2010 as opposed to a benefit for income taxes of $5,456,000 for the second quarter last year.  The tax benefit in 2009 is primarily driven by the impairment charges that were recorded in the second quarter of 2009.  The Company believes it is more likely than not that the Company’s deferred tax asset will be realized in current and future periods.

 

The effective rate used to record income taxes is based on projected results for the fiscal year.  The effective income tax rate as a percentage of income (loss) before income taxes was 31% in the quarters

 

13



Table of Contents

 

ended June 30, 2010 and 2009.  The effective tax rate is lower than the statutory rate primarily due to differences in state and foreign tax rates.

 

Six Months Ended June 30, 2010 compared to Six Months Ended June 30, 2009

 

 

 

For the six months ended
June 30,

 

Increase (decrease)

 

(in thousands)

 

2010

 

200

 

$

 

%

 

 

 

 

 

 

 

 

 

 

 

Revenues

 

$

37,420

 

$

29,235

 

$

8,185

 

28

%

Cost of products sold

 

27,469

 

24,099

 

3,370

 

14

%

Gross margin

 

9,951

 

5,136

 

4,815

 

94

%

Gross margin percentage

 

27

%

18

%

 

9

%

 

 

 

 

 

 

 

 

 

 

Operating costs and expenses:

 

 

 

 

 

 

 

 

 

Selling

 

1,953

 

1,680

 

273

 

16

%

General and administrative

 

4,418

 

3,376

 

1,042

 

31

%

Engineering and development

 

1,940

 

1,985

 

(45

)

(2

)%

Amortization of intangible assets

 

325

 

513

 

(188

)

(37

)%

Fire related losses

 

 

107

 

(107

)

(100

)%

Insurance recoveries

 

(685

)

(107

)

577

 

540

%

Impairment charges

 

 

15,986

 

(15,986

)

(100

)%

Total operating costs and expenses

 

7,951

 

23,540

 

(15,589

)

(66

)%

Operating income

 

2,000

 

(18,404

)

20,404

 

111

%

Interest expense

 

3

 

35

 

(32

)

(91

)%

Writeoff of deferred finance costs

 

 

86

 

(86

)

(100

)%

Other (income) expense, net

 

(138

)

106

 

(244

)

(230

)%

Income (loss) before income taxes

 

2,135

 

(18,631

)

20,766

 

111

%

(Provision) Benefit for income taxes

 

(662

)

5,786

 

6,448

 

111

%

Net income (loss)

 

$

1,473

 

$

(12,845

)

$

14,318

 

111

%

 

NET INCOME (LOSS)    The Company reported net income of $1,473,000 or $0.19 per diluted share for the six months ended June 30, 2010, compared to a net loss of $12,845,000 or $1.71 per diluted share for the six months ended June 30, 2009.  The net loss for last year year includes a total of $15,986,000 ($11,105,000 after tax) of asset impairment charges and $600,000 ($417,000 after tax) of additional inventory reserves.

 

EBITDA, BEFORE IMPAIRMENT CHARGES    EBITDA, before impairment charges, was $3,106,000 for the first six months of 2010 compared to EBITDA loss of $799,000 for the same period last year.  EBITDA, net of Impairment charges is a non-GAAP measurement that consists of income before interest expense, provision for income taxes, depreciation and amortization and impairment charges.  See information included in “Non - GAAP Measures” below for a reconciliation of net income to EBITDA, net of Impairment charges

 

REVENUES           Revenues were $37,420,000 for the six months ended June 30, 2010 compared to $29,235,000 for the six months ended June 30, 2009.  The 28% increase in revenues for the six months ended June 30, 2010 reflects increased sales into nearly all markets, with the vehicle and industrial markets accounting for the largest portion of increased sales over the same period of last year.  We continue to utilize our low cost region operations to ensure we are globally competitive on a cost basis while maintaining the same high technical and commercial standards we have already established.

 

14



Table of Contents

 

Sales to U.S. customers accounted for 59% of our sales in the first six months of 2010 and 58% in the same period last year, with the balance of sales to customers primarily in Europe, Canada and Asia.  Sales volumes for the six months ended June 30, 2010, increased by 28% and there was no foreign currency impact on revenues when compared with the same period of last year.

 

GROSS MARGINS    Gross margin as a percentage of revenues was 27% and 18% for the six months ended June 30, 2010 and 2009, respectively.  The 9% increase in gross margin is primarily a result of increased sales with minimal changes to fixed overhead costs and a reduction in material and variable manufacturing overhead costs.

 

SELLING EXPENSES   Selling expenses were $1,953,000 and $1,680,000 for the six months ended June 30, 2010 and 2009 respectively.  The 16% increase is primarily due to the Company increasing its Sales team, as well as higher sales incentives as a result of increased sales.

 

GENERAL AND ADMINISTRATIVE EXPENSES   General and administrative expenses were $4,418,000 for the six months ended June 30, 2010 compared to $3,376,000 for the six months ended June 30, 2009.  The 31% increase is primarily a result of increased compensation expense, which includes incentive bonuses.

 

ENGINEERING AND DEVELOPMENT EXPENSES   Engineering and development expenses were $1,940,000 for the six months ended June 30, 2010 and $1,985,000 for the same period last year.  We continue to maintain strong engineering capabilities to meet our customers’ needs and to expand our product base for future opportunities.

 

AMORTIZATION OF INTANGIBLE ASSETS   Amortization of intangible assets was $325,000 for the six months ended June 30, 2010 and $513,000 for the same period last year.  The 37% decrease is primarily the result of the impairment that was recognized on certain intangible assets in the second quarter of 2009 and other intangible assets that became fully amortized in 2009.

 

NET INSURANCE RECOVERIES Net insurance recoveries were $685,000 for the six months ended June 30, 2010, compared to $0 for the same period last year.  The recoveries in 2010 represent the final settlement for the business interruption insurance claim which resulted from the fire at the Company’s COPI facility in the fourth quarter of 2008.

 

OTHER INCOME Other Income was $138,000 for the six months ended June 30, 2010, as opposed to Other Expense of $106,000 for the same period last year.  This change is primarily the result of foreign exchange gains and grant income recognized in the current year compared to certain asset writeoffs that occurred in the same period of last year.

 

INCOME TAXES   Provision for income taxes was $662,000 for the six months ended June 30, 2010, as opposed to a benefit for income taxes of $5,786,000 for the same period last year.  The tax benefit in 2009 is primarily driven by the impairment charges that were recorded in the second quarter of 2009.  The Company believes it is more likely than not that the deferred tax asset will be realized in current and future periods.

 

The effective rate used to record income taxes is based on projected results for the fiscal year.  The effective income tax rate as a percentage of income (loss) before income taxes was 31% for the six months ended June 30, 2010 and 2009.  The effective tax rate is lower than the statutory rate primarily due to differences in state and foreign tax rates.

 

Non-GAAP Measures

 

EBITDA is provided for information purposes only and is not a measure of financial performance under generally accepted accounting principles.  The Company believes EBITDA is often a useful measure of a Company’s operating performance and is a significant basis used by the Company’s management to

 

15



Table of Contents

 

measure the operating performance of the Company’s business because EBITDA excludes charges for depreciation, amortization and interest expense that have resulted from our debt financings, as well as our provision for income tax expense.  EBITDA, before impairment charges also excludes impairment charges of $15,986,000 that occurred in the quarter ended June 30, 2009.  Accordingly, the Company believes that EBITDA, before Impairment charges, provides helpful information about the operating performance of its business, apart from the expenses associated with its physical assets or capital structure.  EBITDA is frequently used as one of the bases for comparing businesses in the Company’s industry.  EBITDA does not represent and should not be considered as an alternative to net income, operating income, net cash provided by operating activities or any other measure for determining operating performance or liquidity that is calculated in accordance with generally accepted accounting principles.

 

The Company’s calculation of EBITDA, before Impairment charges for the three and six months ended June 30, 2010 and 2009 is as follows (in thousands):

 

 

 

For the three months
ended June 30,

 

For the six months
ended June 30,

 

 

 

2010

 

2009

 

2010

 

2009

 

Net income (loss)

 

$

739

 

$

(12,115

)

$

1,473

 

$

(12,845

)

Interest expense

 

 

20

 

3

 

35

 

Provision (Benefit) for income tax

 

332

 

(5,456

)

662

 

(5,786

)

Depreciation and amortization

 

472

 

918

 

968

 

1,811

 

Impairment charges

 

 

15,986

 

 

15,986

 

Income before interest expense, provision for income taxes, depreciation and amortization and Impairment charges (EBITDA before Impairment charges)

 

$

1,543

 

$

(647

)

$

3,106

 

$

(799

)

 

Liquidity and Capital Resources

 

The Company’s liquidity position as measured by cash and cash equivalents increased $857,000 to a balance of $5,327,000 at June 30, 2010. This increase compares to a decrease of $1,234,000 for the same period last year. During the first six months of 2010, operations provided $2,792,000 in cash compared to $645,000 used for the same period last year.   The increase in cash provided from operations of $3,437,000 is primarily due to higher net income, along with increases in working capital components as a result of improved economic conditions when compared to the same quarter of last year.  In addition, payments related to employee incentive bonuses were approximately $1,200,000 lower in the first six months of 2010 compared to the same period of 2009 as a result of the economic downturn in 2009 and its impact on the Company.

 

Net cash used in investing activities was $678,000 and $418,000 for the first six months of 2010 and 2009, respectively, which is primarily related to the purchase of property and equipment.  Cash paid for the acquisition of Agile Systems Inc., now known as Allied Motion Canada, net of cash acquired, was $76,000.

 

Net cash used in financing activities was $520,000 for the six months ended June 30, 2010 compared to $170,000 used for the same period last year. The increase in cash used is primarily due to increased paydowns of Company debt and a lower amount of stock transactions under employee benefit stock plans that occurred in the first six months of 2010 compared to the same period of last year.

 

At June 30, 2010, the Company had zero debt obligations.

 

16



Table of Contents

 

The Company’s Amended Credit Agreement, which matured on July 31, 2010, was extended for a three month period through October 31, 2010.  The Credit Agreement provides revolving credit up to $8 million and €2 million. Borrowings under the revolver incur interest of LIBOR plus 2.5%. Overnight borrowings incur interest at PRIME plus 1.50%.  The unused portion of the revolver is charged a commitment fee of .75% per annum.

 

The amended Credit Agreement contains certain financial covenants related to achieving minimum EBITDA levels, maintaining minimum consolidated tangible net worth, and placing a ceiling on the amount of capital expenditures incurred by the Company.  The Company was in compliance with all covenants at June 30, 2010.

 

As of June 30, 2010, the interest rate for all of the Company’s outstanding debt is on an overnight rate of 4.75%.   As of June 30, 2010, the amount available under the lines-of-credit was approximately $10.4 million.

 

The Company’s working capital, capital expenditure and debt service requirements are expected to be funded from cash provided by operations and amounts available under the Company’s credit facilities.

 

The Company has a bank overdraft facility payable to a foreign bank with no monthly repayments required.  The facility had no outstanding balance as of June 30, 2010. The amount available under the overdraft facility was € 300,000 ($366,000 at the June 30, 2010 exchange rate).

 

Critical Accounting Policies

 

The Company has prepared its financial statements in conformity with accounting principles generally accepted in the United States, and these statements necessarily include some amounts that are based on informed judgments and estimates of management.  The Company’s significant accounting policies are discussed in Note 1 in the Annual Report on Form 10-K for the year ended December 31, 2009.  The policies are reviewed on a regular basis.  The Company’s critical accounting policies are subject to judgments and uncertainties which affect the application of such policies.  The Company uses historical experience and all available information to make these judgments and estimates.  As discussed below the Company’s financial position or results of operations may be materially different when reported under different conditions or when using different assumptions in the application of such policies.  In the event estimates or assumptions prove to be different from actual amounts, adjustments are made in subsequent periods to reflect more current information.  The Company’s critical accounting policies include:

 

The Company maintains allowances for doubtful accounts for estimated losses resulting from the inability of its customers to make required payments.  The allowance is based on historical experience and judgments based on current economic and customer specific factors.  Significant judgments are made by management in connection with establishing the Company’s customers’ ability to pay at the time of shipment.  Despite this assessment, from time to time, the Company’s customers are unable to meet their payment obligations.  The Company continues to monitor customers’ credit worthiness, and use judgment in establishing the estimated amounts of customer receivables which may not be collected.  A significant change in the liquidity or financial position of the Company’s customers could have a material adverse impact on the collectibility of accounts receivable and future operating results.

 

Inventory is valued at the lower of cost or market.  The Company monitors and forecasts expected inventory needs based on sales forecasts.  Inventory is written down or written off when it becomes obsolete or when it is deemed excess.  These determinations involve the exercise of significant judgment by management.  If actual market conditions are significantly different from those projected by management, the recorded reserve may be adjusted, and such adjustments may have a significant impact on the Company’s results of operations.  Demand for the Company’s products can fluctuate significantly, and in the past the Company has recorded substantial charges for inventory obsolescence.

 

17



Table of Contents

 

The Company records deferred tax assets and liabilities for the estimated future tax effects of temporary differences between the tax basis of assets and liabilities and amounts recorded in the consolidated financial statements, and for operating loss and tax credit carryforwards.  Realization of the recorded deferred tax assets is dependent upon the Company generating sufficient taxable income in the appropriate tax jurisdiction in future years to obtain benefit from the reversal of net deductible temporary differences and from tax credit and operating loss carryforwards.  A valuation allowance is provided to the extent that management deems it more likely than not that the net deferred tax assets will not be realized.  The amount of deferred tax assets considered realizable is subject to adjustment in future periods if estimates of future taxable income are changed.

 

The Company provides pension and postretirement benefits for certain domestic retirees and records the cost of the obligations based on estimates.  The net periodic costs are recognized as employees render the services necessary to earn the benefits.  Several assumptions are used to calculate the expense and liability related to the plans including the discount rate, the expected rate of return on plan assets, the future rate of compensation increases and health care cost increases.  The discount rate is selected based on a bond pricing model that relates to the projected future cash flows of benefit obligations.  Actuarial assumptions used are based on demographic factors such as retirement and mortality.  Actual results could vary materially from the Company’s actuarial assumptions, which may have an impact on the amount of reported expense or liability for pension or postretirement benefits.

 

Item 3.    Quantitative and Qualitative Disclosures About Market Risk

 

Market risk represents the risk of loss that may impact the financial position, results of operations or cash flows of the Company due to adverse changes in financial and commodity market prices and rates.  The Company is exposed to market risk from changes in foreign currency exchange rates as measured against the United States dollar.  These exposures are directly related to its normal operating and funding activities.

 

Foreign Currency Risk

 

Sales from Premotec are denominated in Euros, thereby creating exposures to changes in exchange rates. The changes in the Euro/U.S. exchange rate may positively or negatively affect the Company’s sales, gross margins, net income and retained earnings. A 10% change in the Euro vs. the U.S dollar would have an immaterial impact on the Company’s earnings for the remainder of the year.  A 10% change in the Euro vs. the U.S. dollar would affect net assets by approximately $1,000,000. The Company does not believe that reasonably possible near-term changes in exchange rates will result in a material effect on future results or cash flows of the Company.

 

Item 4. Controls and Procedures

 

The Company carried out an evaluation, under the supervision and with the participation of the Company’s management, including the Company’s chief executive officer and chief financial officer, of the effectiveness of the disclosure controls and procedures (as defined in Exchange Act Rule 13a-15). Based upon that evaluation, the chief executive officer and chief financial officer concluded that at the end of the Company’s most recent fiscal quarter, the Company’s disclosure controls and procedures are effective.

 

During the period covered by this report, the Company reviewed its internal controls, and there have been no changes in the Company’s internal controls over financial reporting that have materially affected, or are reasonably likely to materially affect, the Company’s internal controls over financial reporting.

 

18



Table of Contents

 

PART II.                OTHER INFORMATION

 

Item 6.    Exhibits

 

(a)

 

Exhibits

 

 

 

 

 

 

 

3.1

 

Amended and Restated Articles of Incorporation of the Company (incorporated by reference to Exhibit 3.1 to the Company’s Form 8-K filed June 16, 2010)

 

 

 

 

 

 

 

3.2

 

Amended and Restated Bylaws of the Company (incorporated by reference to Exhibit 3.2 to the Company’s Form 8-K filed June 16, 2010)

 

 

 

 

 

 

 

31.1

 

Certification of the Chief Executive Officer pursuant to Rule 13a-14(a) or 15d-14(a) of the Securities Exchange Act of 1934, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

 

 

 

 

 

 

 

31.2

 

Certification of the Chief Financial Officer pursuant to Rule 13a-14(a) or 15d-14(a) of the Securities Exchange Act of 1934, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

 

 

 

 

 

 

 

32.1

 

Certification of the Chief Executive Officer pursuant to 18 U.S.C. Section 1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

 

 

 

 

 

 

 

32.2

 

Certification of the Chief Financial Officer pursuant to 18 U.S.C. Section 1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

 

19



Table of Contents

 

SIGNATURES

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

DATE:

     August 16, 2010

 

ALLIED MOTION TECHNOLOGIES INC.

 

 

 

 

 

By:

/s/ Richard D. Smith

 

 

 

 

 

Chief Financial Officer

 

20