Edgar Filing: COHU INC

cohu20161224_10k.htm

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D. C. 20549

FORM 10-K

(Mark One)

[√]	ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2016

[ ]	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Commission file number 1-4298

COHU, INC.

(Exact name of registrant as specified in its charter)

Delaware		95-1934119
(State or other jurisdiction of Incorporation or Organization)		(I.R.S. Employer Identification No.)

12367 Crosthwaite Circle, Poway, California		92064-6817
(Address of principal executive offices)		(Zip Code)

Registrant’s telephone number, including area code: (858) 848-8100

Securities registered pursuant to Section 12(b) of the Act:

Title of Each Class		Name of Exchange on Which Registered
Common Stock, $1.00 par value		The NASDAQ Stock Market LLC

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☑

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☑

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☑ No ☐

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ☑ No ☐

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ☑

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer ☐ Accelerated filer ☑ Non-accelerated filer ☐ Smaller reporting company ☐

(Do not check if a smaller reporting company)

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☑

The aggregate market value of voting stock held by nonaffiliates of the registrant was approximately $165,000,000 based on the closing stock price as reported by the NASDAQ Stock Market LLC as of June 24, 2016. Shares of common stock held by each officer and director and by each person or group who owns 5% or more of the outstanding common stock have been excluded in that such persons or groups may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.

As of February 16, 2017 the Registrant had 26,847,773 shares of its $1.00 par value common stock outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the Proxy Statement for Cohu, Inc.’s 2017 Annual Meeting of Stockholders to be held on May 10, 2017, and to be filed pursuant to Regulation 14A within 120 days after registrant’s fiscal year ended December 31, 2016, are incorporated by reference into Part III of this Report.

COHU, INC.

FORM 10-K FOR THE FISCAL YEAR ENDED DECEMBER 31, 2016

TABLE OF CONTENTS

PART I		Page
Item 1.	Business	1
Item 1A.	Risk Factors	7
Item 1B.	Unresolved Staff Comments	14
Item 2.	Properties	14
Item 3.	Legal Proceedings	14
Item 4.	Mine Safety Disclosures	14

PART II
Item 5.	Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities	15
Item 6.	Selected Financial Data	17
Item 7.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	17
Item 7A.	Quantitative and Qualitative Disclosures About Market Risk	25
Item 8.	Financial Statements and Supplementary Data	25
Item 9.	Changes in and Disagreements with Accountants on Accounting and Financial Disclosure	26
Item 9A.	Controls and Procedures	26
Item 9B.	Other Information	28

PART III
Item 10.	Directors, Executive Officers and Corporate Governance	28
Item 11.	Executive Compensation	28
Item 12.	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
Item 13.	Certain Relationships and Related Transactions, and Director Independence	28
Item 14.	Principal Accounting Fees and Services	28

PART IV
Item 15.	Exhibits, Financial Statement Schedules	29
Item 16.	Form 10-K Summary	57
Signatures		58

The following discussion should be read in conjunction with the Consolidated Financial Statements and notes thereto included elsewhere in this Annual Report on Form 10-K. This Annual Report on Form 10-K contains certain forward-looking statements including expectations of market conditions, challenges and plans, within the meaning of Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), and is subject to the Safe Harbor provisions created by that statute. These forward-looking statements are based on management’s current expectations and beliefs, including estimates and projections about our business. Statements concerning financial position, business strategy, and plans or objectives for future operations are forward-looking statements. These statements are not guarantees of future performance and are subject to certain risks, uncertainties, and assumptions that are difficult to predict and may cause actual results to differ materially from management’s current expectations. Such risks and uncertainties include those set forth in this Annual Report on Form 10-K under the heading “Item 1A. Risk Factors”. The forward-looking statements in this report speak only as of the time they are made and do not necessarily reflect management’s outlook at any other point in time. We undertake no obligation to update publicly any forward-looking statements, whether as a result of new information, future events, or for any other reason. However, readers should carefully review the risk factors set forth in other reports or documents we file from time to time with the Securities and Exchange Commission (“SEC”) after the date of this Annual Report.

PART I

Item 1. Business.

Cohu, Inc. (“Cohu”, “we”, “our” and “us”) was incorporated under the laws of California in 1947, as Kalbfell Lab, Inc. and commenced active operations in the same year. Our name was changed to Kay Lab in 1954. In 1957, Cohu was reincorporated under the laws of the State of Delaware as Cohu Electronics, Inc. and in 1972 our name was changed to Cohu, Inc.

Kita Manufacturing Co. LTD. (“Kita”), acquired by Cohu on January 4, 2017, is a Japan-based manufacturer of spring probe contacts used in final test contactors, probe cards, Printed Circuit Board (PCB) test and connectors sold to customers worldwide. The acquisition of Kita was completed subsequent to Cohu’s fiscal year ended December 31, 2016 and certain disclosures include Kita to enable investors to evaluate the operating and financial effects to our business recognized in the subsequent accounting period. However, unless otherwise indicated, disclosures made throughout this Form 10-K exclude the effect of the acquisition of Kita.

In 2015 we sold our mobile microwave communications equipment business, Broadcast Microwave Services, Inc. (“BMS”) and in 2014 we sold our video camera business, Cohu Electronics. Our decision to sell BMS and Cohu Electronics resulted from the determination that these businesses were no longer a strategic fit within our organization. The operating results of BMS and Cohu Electronics are being presented as discontinued operations and all prior period amounts have been reclassified accordingly. Unless otherwise noted all amounts presented are from continuing operations.

Subsequent to the sale of BMS and Cohu Electronics, we have one reportable segment, semiconductor equipment. Financial information on our reportable segment for each of the last three years is included in Note 8, “Segment and Geographic Information” in Part IV, Item 15(a) of this Form 10-K.

Cohu is a leading supplier of semiconductor test and inspection handlers, micro-electro mechanical system (MEMS) test modules, test contactors and thermal sub-systems used by global semiconductor manufacturers and test subcontractors. We develop, manufacture, sell and service a broad line of equipment capable of handling a wide range of integrated circuits and light-emitting diodes (LEDs). Test handlers are electromechanical systems used to automate testing of integrated circuits and LEDs in the back-end of the semiconductor manufacturing process. Testing determines the quality and performance of the semiconductor device prior to shipment to customers. Testers are designed to verify the performance of semiconductor devices, such as microprocessors, logic, analog, memory or mixed signal devices. Handlers are automated systems engineered to thermally condition and present for testing the packaged semiconductor devices. The majority of test handlers use either pick-and-place, gravity-feed, turret or test-in-strip technologies. The type of device, test parallelism, thermal requirements and signal interface requirements normally determines the appropriate handling approach.

Pick-and-place handling is the predominant solution for devices with leads on all four sides, such as the quad flat pack, or with balls or pads on the bottom or top of the package, such as ball grid array packages, and quad flat no-lead packages as well as certain low profile devices with leads on two sides, such as the thin small outline package, and wafer-level packages. Pick-and-place handlers use robotic mechanisms to move devices from JEDEC (Joint Electron Device Engineering Council) standard trays and place them in precision transport boats or carriers for processing through the system. After testing, devices are sorted and reloaded into designated trays, based on test results.

Gravity-feed handling is the predominant solution for temperature testing of high performance small outline leaded and non-leaded packages, as well as for large packages with leads on only one or two sides as is common in high power devices. In gravity-feed handlers, devices are unloaded from plastic tubes, metal magazines or a bowl at the top of the machine and flow through the system, from top to bottom, propelled by the force of gravity. After testing, devices are sorted and reloaded into tubes, magazines, bulk or tape for additional process steps or final shipment.

Turret handlers are ideally suited for high-volume and low-mix testing of smaller integrated circuit and LED devices. In turret handlers, devices are unloaded from tubes, a bowl, trays or film frame. Turret-based handlers use a rotating turret mechanism that provides very high device throughput and efficient integration of multiple back-end finishing operations.

Test-in-strip handlers accommodate devices in strips or panels prior to the final singulation step in the semiconductor manufacturing process flow and are typically used for high-parallel testing applications.

MEMS test modules are independent physical stimuli units for testing sensor integrated circuits typically used in the automotive and consumer electronics industries. These MEMS test modules can be integrated to our gravity-feed, pick-and-place, turret or test-in-strip handlers for testing a variety of sensors, including pressure, acoustic, magnetic field hall effect, optical and others.

To ensure quality, semiconductors are typically tested at hot and/or cold temperatures, which can simulate the final operating environment. Our test handler products are designed to provide a precisely controlled test environment, often over the range of -60 degrees Celsius to +175 degrees Celsius. As the speed and power of certain integrated circuits, such as microprocessors and mobile processors, have increased so has the need to actively manage the self-generated heat during the test process to maximize yield. This heat is capable of damaging or destroying the integrated circuit and can result in speed downgrading, when devices self-heat and fail to successfully test at their maximum possible speed. Device yields are extremely important and speed grading directly affects the selling price of the integrated circuit and the profitability of the semiconductor manufacturer. In addition to temperature capability, other key factors in the design of test handlers are handling speed, flexibility, parallel test capability, alignment to the test contactors, system size, reliability and cost.

Thermal sub-systems are used in advanced burn-in and system-level test applications to maintain and control the temperature of integrated circuits during the testing process. Burn-in stresses devices for detection of early failures (infant mortality) prior to distribution. The burn-in process is also used by semiconductor manufacturers to develop reliability models of newly introduced devices. The objective of reliability testing is to determine a device’s fault-free operation and estimated useful life by exposing the device to various electrical and thermal conditions that impact its performance. System-level testing is required for functional testing of high-end microprocessors as well as mobile processors combined with memory. This is typically the last test operation of complex, expensive integrated circuits prior to the final electronic integration process.

Our products are complex electromechanical systems that are used in high-volume production environments and many are in service twenty-four hours per day, seven days a week. Customers continuously strive to increase the utilization of their production test equipment and expect high reliability from test handlers, MEMS test modules and thermal subsystems used in burn-in and system-level test. The availability of trained technical support personnel is an important competitive factor in the marketplace. We deploy service engineers worldwide, often within customers’ production facilities, who work with customer personnel to maintain, repair and continuously improve the performance of our equipment.

Our Products

We offer products for the pick-and-place, gravity-feed, test-in-strip and turret handling, MEMS, burn-in and system-level test markets. We currently sell the following products:

Pick-and-place

The Delta MATRiX is a high-performance pick-and-place handler capable of thermally conditioning devices from -60 degrees Celsius to +175 degrees Celsius. It provides increased productivity in several dimensions of performance: high throughput and test parallelism, scalability and active thermal control per test site. With an adjustable test site configuration, customers can reuse existing load-boards, including those made for competitor equipment and gravity handlers. The system also provides flexibility with field upgradeable options including a chamberless tri-temperature test site and auto contactor cleaning.

The Delta Pyramid is a high performance thermal handler for microprocessors, graphics processors and other high power integrated circuits. The Pyramid incorporates our proprietary T-Core thermal control technology that optimizes test yield of power dissipative integrated circuits.

Delta Eclipse is our next generation pick-and-place platform tailored for Fabless and Outsourced Semiconductor Assembly and Test (OSAT) customers, as well as integrated device manufacturers (IDMs). This is a highly configurable platform capable of handling general purpose integrated circuits to advanced computing and mobile processors that require Cohu’s T-Core active thermal control during test.

Delta LinX is our platform serving assembly automation. Back-end semiconductor assembly is the major process step prior to device testing and validation. The LinX product line offers advanced JEDEC handling automation that efficiently links various assembly test processes.

Gravity-Feed

The Rasco SO1000 is a high throughput gravity-feed platform that provides an economical solution for testing up to 4 devices in parallel. This handler can be configured for tube-to-tube or metal magazine input and output, ambient-hot or tri-temperature testing and is easily kit-able for a wide range of integrated circuit packages.

The Rasco SO2000 is a modular platform that offers a reliable solution for testing small integrated circuit packages up to 4 devices in parallel. The base platform can be configured with various input and output modules: tube, metal magazine, bowl, bulk, tape and reel, and an optional laser marking unit. This handler can be configured for ambient-hot or tri-temperature testing.

Rasco Saturn and Jupiter are our next generation gravity handlers delivering a fast index time capability with up to 8 devices tested in parallel at cold and/or hot temperature. Saturn has a configuration that covers testing of very small to medium size packaged integrated circuits, and Jupiter is a version that enables testing of medium to very large packaged integrated circuits typically serving the power management device market.

Test-in-strip

The Rasco Jaguar test-in-strip handler can process an entire strip at once or index the strip for single/multiple device testing. The system has tri-temperature capability, accommodates either stacked or slotted input/output media and is configured with automated vision alignment. The Jaguar is also a solution for in-process testing of next generation multi-stacked packages.

Turret

Ismeca NY32 is a scalable, 32-position turret handler used for testing and inspection of integrated circuits, LEDs, and discrete devices. There are many configurations of the NY32 turret handler: handling wafers in film-frame for input and/or output that is common for LEDs and wafer level package (WLP) devices; tray and tube input and/or output used for integrated circuits and discrete devices; and bowl feeding, tape and de-taping, alignment, laser marking, inspection and test modules. The NY32 is capable of testing devices at ambient and hot temperature.

Ismeca NY20 is a turret handler platform that delivers high throughput combined with fast device change-over time for both high-volume and high-mix testing and inspection of integrated circuits, LEDs and discrete devices. The 20-position turret offers many of the functional modules and capabilities available on the NY32 platform in a smaller footprint, higher throughput handler.

Micro-Electro-Mechanical Systems (“MEMS”)

MEMS test modules generate physical stimuli for testing of sensor integrated circuits. These are typically used in the automotive (e.g. tire pressure, airbag sensors) and consumer electronics (e.g. tilt, motion, microphone and light sensors) industries. The MEMS modules are stand-alone units that can be integrated into our pick-and-place, turret, test-in-strip, or gravity-feed handlers.

Thermal Sub-Systems

We have adapted our proprietary thermal control technology for use by integrated circuit manufacturers in high performance burn-in and system level test. The Delta T-Core thermal sub-systems provide fast and accurate temperature control of the integrated circuit during the testing process using the same technology available in the Pyramid handler. T-Core is also used in engineering device characterization applications.

Delta Fusion HD is a tri-temperature thermal sub-system that utilizes T-Core technology for testing mobile processors. The Fusion HD thermal sub-system can test greater than 450 devices in parallel while thermally conditioning and accurately controlling each device temperature through stringent, power dissipative test scripts.

Contactors

We design, manufacture, sell and support various lines of test contactor solutions. These are consumable, electro-mechanical assemblies that connect the device under test, inside our test handlers, and the automated test equipment. Cohu contactors are used in testing digital semiconductor devices utilizing spring probe technology, such as the ones produced by Kita, and also power management and LED semiconductor devices utilizing cantilever technology, and RF semiconductor devices based on high performance contacts designed to operate at frequencies up to 34 GHz.

Spares

We provide consumable and non-consumable items that are used to maintain, sustain or otherwise enable customer’s equipment to meet its performance, availability and production requirements.

Tooling (kits)

We design and manufacture a wide range of device dedication kits that enable handlers to process different semiconductor packages. Our Philippines operation designs and manufactures the majority of our handler kits and provides applications support to customers in the southeast Asia region.

Sales by Product Line

During the last three years, our consolidated sales were distributed as follows:

	2016		2015		2014
Semiconductor test handler systems		54%		47%		47%
Thermal sub-systems		3%		7%		9%
Spares, contactors, tooling (kits) and service		43%		46%		44%

Customers

Our customers include semiconductor integrated device manufacturers and test subcontractors. Repeat sales to existing customers represent a significant portion of our sales. During the last three years, the following customers comprised 10% or greater of our consolidated net sales:

	2016		2015		2014
Intel		17.2%		18.0%		15.7%
NXP Semiconductors N.V.⁽¹⁾		13.7%		11.4%		11.4%

(1)

The merger of NXP Semiconductors N.V. and Freescale Semiconductor, Ltd. was completed on December 7, 2015. Sales to these customers have been combined for all periods presented.

The loss of, or a significant reduction in, orders by these or other significant customers, including reductions due to market, economic or competitive conditions or the outsourcing of final integrated circuit test to subcontractors that are not our customers would adversely affect our financial condition and results of operations and as a result, we believe that our customer concentration is a significant business risk.

Additional financial information on revenues from external customers by geographic area for each of the last three years is included in Note 8, “Segment and Geographic Information” in Part IV, Item 15(a) of this Form 10-K.

Sales and Marketing

We market our products worldwide through a combination of a direct sales force and independent sales representatives. In geographic areas where we believe there is sufficient sales potential, we generally employ our own personnel. Our U.S. sales office is located in Poway, California. The Europe sales offices are located in Kolbermoor, Germany and La Chaux-de-Fonds, Switzerland. We operate in Asia with offices in Singapore, Malaysia, Thailand, Philippines, Taiwan, China, Korea, and subsequent to the acquisition of Kita on January 4, 2017, Japan.

Competition

The semiconductor equipment industry is intensely competitive and is characterized by rapid technological change and demanding worldwide service requirements. Significant competitive factors include product performance, price, reliability, customer support and installed base of products. While we are a leading worldwide supplier of semiconductor test handling equipment, we face substantial competition. The Japanese and Korean markets for test handling equipment are large and represent a significant percentage of the worldwide market. During each of the last three years our sales to Japanese and Korean customers, who have historically purchased test handling equipment from Asian suppliers, have represented less than 10% of our total sales. Some of our current and potential competitors are part of larger corporations that have substantially greater financial, engineering, manufacturing and customer support capabilities and offer more extensive product offerings than Cohu. To remain competitive we believe we will require significant financial resources to offer a broad range of products, maintain customer support and service centers worldwide and to invest in research and development of new products. Failure to introduce new products in a timely manner or the introduction by competitors of products with actual or perceived advantages could result in a loss of competitive position and reduced sales of existing products. No assurance can be given that we will continue to compete successfully throughout the world.

Backlog

Our backlog of unfilled orders for products, was $65.1 million at December 31, 2016 and $66.5 million at December 26, 2015.

Backlog is generally expected to be shipped within the next twelve months. Our backlog at any point in time may not be representative of actual sales in any future period due to the possibility of customer changes in delivery schedules, cancellation of orders, potential delays in product shipments, difficulties in obtaining parts from suppliers, failure to satisfy customer acceptance requirements resulting in the inability to recognize revenue under accounting requirements. Furthermore, many orders are subject to cancellation or rescheduling by the customer with limited or no penalty. A reduction in backlog during any period could have a material adverse effect on our business, financial condition and results of operations.

Manufacturing and Raw Materials

Our principal manufacturing operations are currently located in Malacca, Malaysia (handlers); Poway, California (thermal subsystems); Laguna, Philippines (kits and contactors); Kolbermoor, Germany (handlers); Osaka, Japan (contactors).

Many of the components and subassemblies we utilize are standard products, although some items are made to our specifications. Certain components are obtained or are available from a limited number of suppliers. We seek to reduce our dependence on sole and limited source suppliers, however in some cases the complete or partial loss of certain of these sources could have a material adverse effect on our operations while we attempt to locate and qualify replacement suppliers.

Patents and Trademarks

Our technology is protected by various intellectual property laws including patent, license, trademark, copyright and trade secret laws. In addition, we believe that, due to the rapid pace of technological change in the semiconductor equipment industry, the successful manufacture and sale of our products also depends upon our experience, technological know-how, manufacturing and marketing skills and speed of response to sales opportunities. In the absence of patent protection, we would be vulnerable to competitors who attempt to copy or imitate our products or processes. We believe our intellectual property has value and we have in the past and will in the future take actions we deem appropriate to protect such property from misappropriation. However, there can be no assurance such actions will provide meaningful protection from competition. Protecting our intellectual property rights or defending against claims brought by other holders of such rights, either directly against us or against customers we have agreed to indemnify, would likely be expensive and time consuming and could have a material adverse effect on our operations.

Research and Development

Research and development activities are carried on in our various subsidiaries and are directed toward development of new products and equipment, as well as enhancements to existing products and equipment. Our total research and development expense was $34.8 million in 2016, $33.1 million in 2015 and $36.0 million in 2014.

We work closely with our customers to make improvements to our existing products and in the development of new products. We expect to continue to invest heavily in research and development and must manage product transitions successfully as introductions of new products could adversely impact sales of existing products.

Environmental Laws

Our business is subject to numerous federal, state, local and international environmental laws. On occasion, we have been notified by local authorities of instances of noncompliance with local and/or state environmental laws. We believe we are in compliance with applicable federal, state, local and international regulations. Compliance with foreign, federal, state and local laws that have been enacted or adopted regulating the discharge of materials into the environment or otherwise relating to the protection of the environment and the prevention of climate change have not had a material effect and are not expected to have a material effect upon our capital expenditures, results of operations or our competitive position. However, future changes in regulations may require expenditures that could adversely impact earnings in future years.

Executive Officers of the Registrant

The following sets forth the names, ages, positions and offices held by all executive officers of Cohu as of February 16, 2017. Executive Officers serve at the discretion of the Board of Directors, until their successors are appointed.

Name	Age	Position
Luis A. Müller	47	President and Chief Executive Officer
Jeffrey D. Jones	55	Vice President, Finance and Chief Financial Officer
John H. Allen	65	Vice President, Administration
Hock W. Chiang	59	Vice President, Global Sales & Service

Dr. Müller joined Delta in 2005 as Director of Engineering. In July 2008, Dr. Müller was promoted to the position of Vice President of the High Speed Handling Group for Delta and in January 2009 he was named Managing Director of Rasco. In January 2011, Dr. Müller was appointed President of Cohu’s Semiconductor Equipment Group. Effective December 28, 2014, Dr. Müller was promoted to President and Chief Executive Officer of Cohu and was appointed to Cohu’s Board of Directors.

Mr. Jones joined Delta in 2005 as Vice President Finance and Controller. In November 2007, Mr. Jones was named Vice President, Finance and Chief Financial Officer of Cohu. Prior to joining Delta, Mr. Jones, was a consultant from 2004 to 2005 and Vice President and General Manager of the Systems Group at SBS Technologies, Inc., a designer and manufacturer of embedded computer products, from 1998 to 2003. Prior to SBS Technologies, Mr. Jones was an Audit Manager for Coopers & Lybrand (now PriceWaterhouseCoopers).

Mr. Allen has been employed by Cohu since June 1995. He was Director of Finance until September 1995 when he was promoted to Vice President, Finance and he was then appointed Chief Financial Officer in October 1995. In November 2007, Mr. Allen was named Vice President, Administration. Prior to joining Cohu, Mr. Allen held various positions with Ernst & Young LLP from 1976 until June 1995 and had been a partner with that firm since 1987.

Mr. Chiang has been employed by Cohu since October 2012 as Vice President, Global Sales and Service. Prior to joining Cohu, Mr. Chiang served as a Director for AXElite Technology Corporation. Additionally, from 1995 through 2011, Mr. Chiang held a variety of positions at Teradyne, Inc. (“Teradyne”) including Director – Asia SOC Marketing & New Business Development, Managing Director of Teradyne’s Singapore and China operations and Director of Worldwide Field Total Quality Management.

Employees

Including headcount additions arising from our acquisition of Kita, as of January 4, 2017, we had approximately 1,800 employees. Our employee headcount has fluctuated in the last five years primarily due to the volatile business conditions in the semiconductor equipment industry, the acquisitions of Ismeca and Kita, and the divestiture of Broadcast Microwave Services and Cohu Electronics. Our employees in the United States and most locations in Asia are not covered by collective bargaining agreements, however, certain employees at Rasco’s facility in Kolbermoor, Germany, are represented by a works council, employees at Ismeca’s facility La Chaux-de-Fonds, Switzerland are members of the micro-technology and Swiss watch trade union and certain employees in Ismeca’s China operation belong to local trade unions. We have not experienced any work stoppages and consider our relations with our employees to be good. We believe that a great part of our future success will depend on our continued ability to attract and retain qualified employees. Competition for the services of certain personnel, particularly those with technical skills, is intense. There can be no assurance that we will be able to attract, hire, assimilate and retain a sufficient number of qualified employees.

Available Information

Our web site address is www.cohu.com. We make available free of charge, on or through our web site, our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and all amendments to those reports, as soon as reasonably practicable after such material is electronically filed with the Securities and Exchange Commission. Our Code of Business Conduct and Ethics and other documents related to our corporate governance is also posted on our web site at www.cohu.com/investors/corporategovernance. Information contained on our web site is not deemed part of this report.

Item 1A. Risk Factors.

Set forth below and elsewhere in this report on Form 10-K and in other documents we file with the SEC, are risks and uncertainties that could cause actual results to differ materially from the results expressed or implied by the forward-looking statements contained in this Annual Report. Before deciding to purchase, hold or sell our common stock, you should carefully consider the risks described below in addition to the other cautionary statements and risks described elsewhere, and the other information contained, in this Annual Report on Form 10-K. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties not presently known to us or that we currently deem immaterial may also affect our business. If any of these known or unknown risks or uncertainties actually occurs with material adverse effects on Cohu, our business, financial condition and results of operations could be seriously harmed. The trading price of our common stock could decline due to any of these risks, and you may lose all or part of your investment.

We are exposed to risks associated with acquisitions, investments and divestitures.

We have made, and may in the future make, acquisitions of, or significant investments in, businesses with complementary products, services and/or technologies such as our acquisition of Kita, which was completed on January 4, 2017. Acquisitions and investments involve numerous risks, including, but not limited to:

●

difficulties and increased costs in connection with integration of the personnel, operations, technologies and products of acquired businesses;

●

increasing the scope, geographic diversity and complexity of our business;

●

diversion of management’s attention from other operational matters;

●

the potential loss of key employees or customers of Cohu or acquired businesses;

●

lack of synergy, or the inability to realize expected synergies, resulting from the acquisition;

●

failure to commercialize purchased technology; and

●

the impairment of acquired intangible assets and goodwill that could result in significant charges to operating results in future periods.

We may be required to finance future acquisitions and investments through a combination of borrowings, proceeds from equity or debt offerings and the use of cash, cash equivalents and short-term investments.

Mergers, acquisitions and investments are inherently risky and the inability to effectively manage these risks could materially and adversely affect our business, financial condition and results of operations. At December 31, 2016, we had goodwill and net purchased intangible assets balances of $58.8 million and $17.8 million, respectively. These amounts exclude the impact of our acquisition of Kita, which was completed subsequent to our fiscal year end. We expect our goodwill and purchased intangible asset balances will increase as a result of this transaction.

We are making investments in new products to enter new markets, which may adversely affect our operating results; these investments may not be successful.

Given the highly competitive and rapidly evolving technology environment in which we operate, we believe it is important to develop new product offerings to meet strategic opportunities as they evolve. This includes developing products that we believe are necessary to meet the future needs of the marketplace. We are currently investing in new product development programs to enable us to compete in the test contactor and wafer level package (WLP) probing markets. We expect to continue to make investments and we may at any time, based on product need or marketplace demand, decide to significantly increase our product development expenditures in these or other products. The cost of investments in new product offerings can have a negative impact on our operating results and there can be no assurance that any new products we develop will be accepted in the marketplace or generate material revenues for us.

We are exposed to the risks of operating a global business.

We are a global corporation with offices and subsidiaries in certain foreign locations to manufacture our products, support our sales and services to the global semiconductor industry and, as such, we face risks in doing business abroad. Certain aspects inherent in transacting business internationally could negatively impact our operating results, including:

●

costs and difficulties in staffing and managing international operations;

	●	legislative or regulatory requirements and potential changes in or interpretations of requirements in the United States and in the countries in which we manufacture or sell our products;
	●	trade restrictions, including treaty changes, sanctions and the suspension of export licenses;
	●	compliance with and changes in import/export tariffs and regulations;

●

difficulties in enforcing contractual and intellectual property rights;

●

longer payment cycles;

●

local political and economic conditions;

●

potentially adverse tax consequences, including restrictions on repatriating earnings and the threat of “double taxation”; and

●

fluctuations in foreign currency exchange rates against the U.S. Dollar, which can affect demand for our products and increase our costs.

Additionally, managing geographically dispersed operations presents difficult challenges associated with organizational alignment and infrastructure, communications and information technology, inventory control, customer relationship management, terrorist threats and related security matters and cultural diversities. If we are unsuccessful in managing such operations effectively, our business and results of operations will be adversely affected.

We are in the process of transitioning our manufacturing to Asia. Our inability to manage multiple manufacturing sites during this transition and to secure raw materials meeting our quality, cost and other requirements, or failures by our suppliers to perform, could harm our sales, service levels and reputation.

Our reliance on overseas manufacturers exposes us to significant risks including complex management, foreign currency, legal, tax and economic risks, which we may not be able to address quickly and adequately. In addition, it is time consuming and costly to qualify overseas supplier relationships. Therefore, if we should fail to effectively manage overseas manufacturing operations or if one or more of them should experience delays, disruptions or quality control problems, or if we had to change or add additional manufacturing sites, our ability to ship products to our customers could be delayed. Also, the addition of overseas manufacturing locations increases the demands on our administrative and operations infrastructure and the complexity of our supply chain management. If our overseas manufacturing locations are unable to meet our manufacturing requirements in a timely manner, our ability to ship products and to realize the related revenues when anticipated could be materially affected.

Our suppliers are subject to the fluctuations in general economic cycles, and the global economic conditions may impact their ability to operate their business. They may also be impacted by the increasing costs of raw materials, labor and distribution, resulting in demands for less attractive contract terms or an inability for them to meet our requirements or conduct their own businesses. The performance and financial condition of a supplier may cause us to alter our business terms or to cease doing business with a particular supplier, or change our sourcing practices generally, which could in turn adversely affect our own business and financial condition.

Failure of critical suppliers to deliver sufficient quantities of parts in a timely and cost-effective manner could adversely impact our operations.

We use numerous vendors to supply parts, components and subassemblies for the manufacture of our products. It is not always possible to maintain multiple qualified suppliers for all of our parts, components and subassemblies. As a result, certain key parts may be available only from a single supplier or a limited number of suppliers. In addition, suppliers may cease manufacturing certain components that are difficult to replace without significant reengineering of our products. On occasion, we have experienced problems in obtaining adequate and reliable quantities of various parts and components from certain key suppliers. Our results of operations may be materially and adversely impacted if we do not receive sufficient parts to meet our requirements in a timely and cost effective manner.

The semiconductor industry we serve is highly volatile and unpredictable.

Visibility into our markets is limited. The semiconductor equipment business is highly dependent on the overall strength of the semiconductor industry. Historically, the semiconductor industry has been highly cyclical with recurring periods of oversupply and excess capacity, which often have had a significant effect on the semiconductor industry’s demand for capital equipment, including equipment of the type we manufacture and market. We anticipate that the markets for newer generations of semiconductors and semiconductor equipment may also be subject to similar cycles and severe downturns. Any significant reductions in capital equipment investment by semiconductor integrated device manufacturers and test subcontractors will materially and adversely affect our business, financial position and results of operations. In addition, the volatile and unpredictable nature of semiconductor equipment demand has in the past and may in the future expose us to significant excess and obsolete and lower of cost or market inventory write-offs and reserve requirements. In 2016, 2015 and 2014, we recorded pre-tax inventory-related charges of approximately $1.1 million, $2.4 million, and $2.6 million, respectively, primarily as a result of changes in customer forecasts.

Due to the nature of our business, we need continued access to capital, which if not available to us or if not available on favorable terms, could harm our ability to operate or expand our business.

Our business requires capital to finance accounts receivable and product inventory that is not financed by trade creditors when our business is expanding. If cash from available sources is insufficient or cash is used for unanticipated needs, we may require additional capital sooner than anticipated.

We believe that our existing sources of liquidity, including cash resources and cash provided by operating activities will provide sufficient resources to meet our working capital and cash requirements for at least the next twelve months. In the event we are required, or elect, to raise additional funds, we may be unable to do so on favorable terms, or at all, and may incur expenses in raising the additional funds and future indebtedness could adversely affect our operating results and severely limit our ability to plan for, or react to, changes in our business or industry. We could also be limited by financial and other restrictive covenants in credit arrangements, including limitations on our borrowing of additional funds and issuing dividends. If we choose to issue new equity securities, existing stockholders may experience dilution, or the new equity securities may have rights, preferences or privileges senior to those of existing holders of common stock. If we cannot raise funds on acceptable terms, we may not be able to take advantage of future opportunities or respond to competitive pressures or unanticipated requirements. Any inability to raise additional capital when required could have an adverse effect on our business and operating results.

The semiconductor equipment industry in general and the test handler market in particular, is highly competitive.

The semiconductor test handler industry is intensely competitive and we face substantial competition from numerous companies throughout the world. The test handler industry, while relatively small in terms of worldwide market size compared to other segments of the semiconductor equipment industry, has several participants resulting in intense competitive pricing pressures. Future competition may include companies that do not currently supply test handlers. Some of our competitors are part of larger corporations that have substantially greater financial, engineering, manufacturing and customer support capabilities and provide more extensive product offerings. In addition, there are emerging semiconductor equipment companies that provide or may provide innovative technology incorporated in products that may compete successfully against our products. We expect our competitors to continue to improve the design and performance of their current products and introduce new products with improved performance capabilities. Our failure to introduce new products in a timely manner, the introduction by our competitors of products with perceived or actual advantages, or disputes over rights to use certain intellectual property or technology could result in a loss of our competitive position and reduced sales of, or margins on our existing products. We believe that competitive conditions in the semiconductor test handler market have intensified over the last several years. This intense competition has adversely impacted our product average selling prices and gross margins on certain products. If we are unable to reduce the cost of our existing products and successfully introduce new lower cost products we expect these competitive conditions to negatively impact our gross margin and operating results in the foreseeable future.

Semiconductor equipment is subject to rapid technological change, product introductions and transitions which may result in inventory write-offs, and our new product development involves numerous risks and uncertainties.

Semiconductor equipment and processes are subject to rapid technological change. We believe that our future success will depend in part on our ability to enhance existing products and develop new products with improved performance capabilities. We expect to continue to invest heavily in research and development and must manage product transitions successfully, as introductions of new products, including the products obtained in our acquisitions, may adversely impact sales and/or margins of existing products. In addition, the introduction of new products by us or by our competitors, the concentration of our revenues in a limited number of large customers, the migration to new semiconductor testing methodologies and the custom nature of our inventory parts increases the risk that our established products and related inventory may become obsolete, resulting in significant excess and obsolete inventory exposure. This exposure resulted in charges to operations during each of the years in the three-year period ended December 31, 2016. Future inventory write-offs and increased inventory reserve requirements could have a material adverse impact on our results of operations and financial condition.

The design, development, commercial introduction and manufacture of new semiconductor equipment is an inherently complex process that involves a number of risks and uncertainties. These risks include potential problems in meeting customer acceptance and performance requirements, integration of the equipment with other suppliers’ equipment and the customers’ manufacturing processes, transitioning from product development to volume manufacturing and the ability of the equipment to satisfy the semiconductor industry’s constantly evolving needs and achieve commercial acceptance at prices that produce satisfactory profit margins. The design and development of new semiconductor equipment is heavily influenced by changes in integrated circuit assembly, test and final manufacturing processes and integrated circuit package design changes. We believe that the rate of change in such processes and integrated circuit packages is accelerating. As a result of these changes and other factors, assessing the market potential and commercial viability of handling, MEMS, system-level and burn-in test equipment is extremely difficult and subject to a great deal of risk. In addition, not all integrated circuit manufacturers employ the same manufacturing processes. Differences in such processes make it difficult to design standard test products that are capable of achieving broad market acceptance. As a result, we might not accurately assess the semiconductor industry’s future equipment requirements and fail to design and develop products that meet such requirements and achieve market acceptance. Failure to accurately assess customer requirements and market trends for new semiconductor test products may have a material adverse impact on our operations, financial condition and results of operations.

The transition from product development to the manufacture of new semiconductor equipment is a difficult process and delays in product introductions and problems in manufacturing such equipment are common. We have in the past and may in the future experience difficulties in manufacturing and volume production of our new equipment. In addition, as is common with semiconductor equipment, after sale support and warranty costs have typically been significantly higher with new products than with our established products. Future technologies, processes and product developments may render our current or future product offerings obsolete and we might not be able to develop, introduce and successfully manufacture new products or make enhancements to our existing products in a timely manner to satisfy customer requirements or achieve market acceptance. Furthermore, we might not realize acceptable profit margins on such products.

Global economic conditions may have an impact on our business and financial condition in ways that we currently cannot predict.

Our operations and financial results depend on worldwide economic conditions and their impact on levels of business spending. Continued uncertainties may reduce future sales of our products and services. While we believe we have a strong customer base and have experienced strong collections in the past, if the current market conditions deteriorate, we may experience increased collection times and greater write-offs, either of which could have a material adverse effect on our cash flow.

In addition, the tightening of credit markets and concerns regarding the availability of credit may make it more difficult for our customers to raise capital, whether debt or equity, to finance their purchases of capital equipment, including the products we sell. Delays in our customers’ ability to obtain such financing, or the unavailability of such financing would adversely affect our product sales and revenues and therefore harm our business and operating results. We cannot predict the timing, duration of or effect on our business of an economic slowdown or the timing or strength of a subsequent recovery.

A limited number of customers account for a substantial percentage of our net sales.

A small number of customers have been responsible for a significant portion of our net sales. During the past five years, the percentage of our sales derived from these significant customers has varied greatly. Such variations are due to changes in the customers’ business, consolidation within the semiconductor industry and their purchase of products from our competitors. It is common in the semiconductor test handler industry for customers to purchase equipment from more than one equipment supplier, increasing the risk that our competitive position with a specific customer may deteriorate. No assurance can be given that we will continue to maintain our competitive position with these or other significant customers. Furthermore, we expect the percentage of our revenues derived from significant customers will vary greatly in future periods. The loss of, or a significant reduction in, orders by these or other significant customers as a result of competitive products, market conditions including end market demand for our customers’ products, outsourcing final semiconductor test to test subcontractors that are not our customers or other factors, would have a material adverse impact on our business, financial condition and results of operations. Furthermore, the concentration of our revenues in a limited number of large customers is likely to cause significant fluctuations in our future annual and quarterly operating results.

If we cannot continue to develop, manufacture and market products and services that meet customer requirements for innovation and quality, our revenue and gross margin may suffer.

The process of developing new high technology products and services and enhancing existing products and services is complex, costly and uncertain, and any failure by us to anticipate customers’ changing needs and emerging technological trends accurately could significantly harm our market share and results of operations. In addition, in the course of conducting our business, we must adequately address quality issues associated with our products and services, including defects in our engineering, design and manufacturing processes, as well as defects in third-party components included in our products. In order to address quality issues, we work extensively with our customers and suppliers and engage in product testing to determine the cause of quality problems and appropriate solutions. Finding solutions to quality issues can be expensive and may result in additional warranty, replacement and other costs, adversely affecting our profits. In addition, quality issues can impair our relationships with new or existing customers and adversely affect our reputation, which could lead to a material adverse effect on our operating results.

The seasonal nature of the semiconductor equipment industry places enormous demands on our employees, operations and infrastructure.

The semiconductor equipment industry is characterized by dramatic and sometimes rapid changes in demand for its products. These are generally dictated by introduction of new consumer products, launch of new model vehicles, implementation of new communications infrastructure, or in response to an increase in industrial equipment and machinery that utilizes semiconductors. A number of other factors including changes in integrated circuit design and packaging may affect demand for our products. Sudden changes in demand for semiconductor equipment have a significant impact on our operations. We have in the past and may in the future experience difficulties, particularly in manufacturing, in training and recruiting the large number of additions to our workforce. The volatility in headcount and business levels, combined with the seasonal nature of the semiconductor industry, may require that we invest substantial amounts in new operational and financial systems, procedures and controls. We may not be able to successfully adjust our systems, facilities and production capacity to meet our customers’ changing requirements. The inability to meet such requirements will have an adverse impact on our business, financial position and results of operations.

The loss of key personnel could adversely impact our business.

Certain key personnel are critical to our business. Our future operating results depend substantially upon the continued service of our key personnel, many of whom are not bound by employment or non-competition agreements. Our future operating results also depend in significant part upon our ability to attract and retain qualified management, manufacturing, technical, engineering, marketing, sales and support personnel. Competition for qualified personnel, particularly those with technical skills, is intense, and we cannot ensure success in attracting or retaining qualified personnel. In addition, the cost of living in the San Diego, California, Kolbermoor, Germany and La Chaux-de-Fonds, Switzerland areas, where the majority of our development personnel are located, is high and we have had difficulty in recruiting prospective employees from other locations. There may be only a limited number of persons with the requisite skills and relevant industry experience to serve in these positions and it may become increasingly difficult for us to hire personnel over time. Our business, financial condition and results of operations could be materially adversely affected by the loss of any of our key employees, by the failure of any key employee to perform in his or her current position, or by our inability to attract and retain skilled employees.

Third parties may violate our proprietary rights or accuse us of infringing upon their proprietary rights.

We rely on patent, copyright, trademark and trade secret laws to establish and maintain proprietary rights in our technology and products. Any of our proprietary rights may expire due to patent life, or be challenged, invalidated or circumvented. In addition, from time to time, we receive notices from third parties regarding patent or copyright claims. Any such claims, with or without merit, could be time-consuming to defend, result in costly litigation, divert management’s attention and resources and cause us to incur significant expenses. In the event of a successful claim of infringement against us and our failure or inability to license the infringed technology or to substitute similar non-infringing technology, our business, financial condition and results of operations could be adversely affected.

A majority of our revenues are generated from exports to foreign countries, primarily in Asia, that are subject to economic and political instability and we compete against a number of Asian test handling equipment suppliers.

The majority of our export sales are made to destinations in Asia. Political or economic instability, particularly in Asia, may adversely impact the demand for capital equipment, including equipment of the type we manufacture and market. In addition, we face intense competition from a number of Asian suppliers that have certain advantages over United States (“U.S.”) suppliers, including us. These advantages include, among other things, proximity to customers, favorable tariffs and affiliation with significantly larger organizations. In addition, changes in the amount or price of semiconductors produced in Asia could impact the profitability or capital equipment spending programs of our foreign and domestic customers.

Unanticipated changes in our tax provisions or exposure to additional income tax liabilities could affect our profitability.

We are subject to income and other taxes in the U.S. and numerous foreign jurisdictions. Our tax liabilities are affected by, among other things, the amounts our affiliated entities charge each other for intercompany transactions. We may be subject to ongoing tax examinations in various jurisdictions. Tax authorities may disagree with our intercompany charges or other matters and assess additional taxes. While we regularly assess the likely outcomes of these examinations in order to determine the appropriateness of our tax provision, tax audits are inherently uncertain and an unfavorable outcome could occur. An unanticipated, unfavorable outcome in any specific period could harm our operating results for that period or future periods. The financial cost and management attention and time devoted to defending income tax positions may divert resources from our business operations, which could harm our business and profitability. Tax examinations may also impact the timing and/or amount of our refund claims. In addition, our effective tax rate in the future could be adversely affected by changes in the mix of earnings in countries with differing statutory tax rates, changes in the valuation of our deferred tax assets and liabilities, changes in tax laws and the discovery of new information in the course of our tax return preparation process. In particular, the carrying value of our deferred tax assets and the utilization of our net operating loss and credit carryforwards are dependent on our ability to generate future taxable income in the U.S and other countries. Furthermore, these carryforwards may be subject to annual limitations as a result of changes in Cohu’s ownership.

In addition, in October 2015, the Organization for Economic Co-operation and Development (OECD) issued its reports on the 15 focus areas identified in its Action Plan on Base Erosion and Profit Shifting (“BEPS”). Some BEPS measures will require treaty based or legislative action by countries. The final impact of BEPS on Cohu’s income tax provision and liability is currently not quantifiable and is likely to result in additional recordkeeping and administrative cost to implement certain of its requirements.

Compliance with regulations may impact sales to foreign customers and impose costs.

Certain products and services that we offer require compliance with U.S. and other foreign country export and other regulations. Compliance with complex U.S. and other foreign country laws and regulations that apply to our international sales activities increases our cost of doing business in international jurisdictions and could expose us or our employees to fines and penalties. These laws and regulations include import and export requirements, the U.S. State Department International Traffic in Arms Regulations (“ITAR”) and U.S. and other foreign country laws such as the Foreign Corrupt Practices Act (“FCPA”), and local laws prohibiting corrupt payments to governmental officials. Violations of these laws and regulations could result in fines, criminal sanctions against us, our officers or our employees, prohibitions on the conduct of our business and damage to our reputation. Although we have implemented policies and procedures designed to ensure compliance with these laws, there can be no assurance that our employees, contractors or agents will not violate our policies, or that our policies will be effective in preventing all potential violations. Any such violations could include prohibitions on our ability to offer our products and services to one or more countries, and could also materially damage our reputation, our brand, our international expansion efforts, our ability to attract and retain employees, our business and our operating results. Further, defending against claims of violations of these laws and regulations, even if we are successful, could be time-consuming, result in costly litigation, divert management’s attention and resources and cause us to incur significant expenses.

In addition to government regulations regarding sale and export, we are subject to other regulations regarding our products. For example, the U.S. Securities and Exchange Commission has adopted disclosure rules for companies that use conflict minerals in their products, with substantial supply chain verification requirements in the event that the materials come from, or could have come from, the Democratic Republic of the Congo or adjoining countries. These new rules and verification requirements will impose additional costs on us and on our suppliers, and may limit the sources or increase the cost of materials used in our products. Further, if we are unable to certify that our products are conflict free, we may face challenges with our customers that could place us at a competitive disadvantage, and our reputation may be harmed.

Our business and operations could suffer in the event of security breaches.

Attempts by others to gain unauthorized access to information technology systems are becoming more sophisticated and are sometimes successful. These attempts, which might be related to industrial or other espionage, include covertly introducing malware to our computers and networks and impersonating authorized users, among others. We seek to detect and investigate all security incidents and to prevent their recurrence, but in some cases, we might be unaware of an incident or its magnitude and effects. The theft, unauthorized use or publication of our intellectual property and/or confidential business information could harm our competitive position, reduce the value of our investment in research and development and other strategic initiatives or otherwise adversely affect our business. To the extent that any security breach results in inappropriate disclosure of our customers' or licensees' confidential information, we may incur liability as a result. In addition, we may be required to devote additional resources to the security of our information technology systems.

The occurrence of natural disasters and geopolitical instability caused by terrorist attacks and other threats may adversely impact our operations and sales.

Our Corporate headquarters is located in San Diego, California, our Asian sales and service headquarters is located in Singapore and the majority of our sales are made to destinations in Asia. In addition, we have manufacturing plants in Malaysia, Philippines and Japan. These regions are known for being vulnerable to natural disasters and other risks, such as earthquakes, tsunamis, fires, and floods, which at times have disrupted the local economies. A significant earthquake or tsunami could materially affect operating results. We are not insured for most losses and business interruptions of this kind, and presently have limited redundant, multiple site capacity in the event of a natural disaster. In the event of such disaster, our business would suffer.

Our financial and operating results may vary and may fall below analysts’ estimates, which may cause the price of our common stock to decline.

Our operating results may fluctuate from quarter to quarter due to a variety of factors including, but not limited to:

●	seasonal nature of the semiconductor equipment industry;

●	timing and amount of orders from customers and shipments to customers;

●	inability to recognize revenue due to accounting requirements;

●	inventory writedowns;

●	inability to deliver solutions as expected by our customers; and

●	intangible and deferred tax asset writedowns.

Due to these factors or other unanticipated events, quarter-to-quarter comparisons of our operating results may not be reliable indicators of our future performance. In addition, from time to time our quarterly financial results may fall below the expectations of the securities and industry analysts who publish reports on our company or of investors in general. This could cause the market price of our stock to decline, perhaps significantly.

We have experienced significant volatility in our stock price.

A variety of factors may cause the price of our stock to be volatile. In recent years, the stock market in general, and the market for shares of high-technology companies in particular, including ours, have experienced extreme price fluctuations, which have often been unrelated to the operating performance of affected companies. During the three-year period ended December 31, 2016 the price of our common stock has ranged from $14.43 to $9.14. The price of our stock may be more volatile than the stock of other companies due to, among other factors, the unpredictable and seasonal nature of the semiconductor industry, our significant customer concentration, intense competition in the test handler industry, our limited backlog and our relatively low daily stock trading volume. The market price of our common stock is likely to continue to fluctuate significantly in the future, including fluctuations related and unrelated to our performance.

Item 1B. Unresolved Staff Comments.

None.

Item 2. Properties.

Certain information concerning our principal properties at December 31, 2016, is set forth below:

	Approximate
Location	Sq. Footage		Ownership
Poway, California ⁽¹⁾		147,000	Leased
Kolbermoor, Germany		40,000	Owned
Malacca, Malaysia		84,000	Leased
Calamba City, Laguna, Philippines		51,000	Leased
La Chaux-de-Fonds, Switzerland		34,000	Leased
Osaka, Japan ⁽²⁾		67,000	Owned
Attleboro, Massachusetts ⁽²⁾		7,000	Leased

(1)

Cohu Corporate offices. On December 4, 2015, we completed the sale of our headquarters facility located in Poway, California. In December 2016, our leased space decreased to approximately 147,000 square feet of the Poway facility. Additional information related to the sale-leaseback of the Poway facility is included in Note 13, “Sale-leaseback of Poway Facility” in Part IV, Item 15(a) of this Form 10-K.

(2)

Locations were acquired on January 4, 2017, in conjunction with the purchase of Kita, see Note 2, “Subsequent Event”, included in Part IV, Item 15(a) of this Form 10-K.

In addition to the locations listed above, we lease other properties primarily for sales and service offices in various locations. We believe our facilities are suitable for their respective uses and are adequate for our present needs.

Item 3. Legal Proceedings.

From time-to-time we are involved in various legal proceedings, examinations by various tax authorities and claims that have arisen in the ordinary course of our business.

The outcome of any litigation, examinations and claims is inherently uncertain. While there can be no assurance, at the present time we do not believe that the resolution of the matters described above will have a material adverse effect on our assets, financial position or results of operations.

Item 4. Mine Safety Disclosures

Not applicable.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

(a)

Market Information

Cohu, Inc. stock is traded on the NASDAQ Global Select Market under the symbol "COHU". The following table sets forth the high and low sales prices as reported on the NASDAQ Global Select Market during the last two years.

	Fiscal 2016				Fiscal 2015
	High		Low		High		Low
First Quarter	$	12.93	$	10.87	$	12.10	$	10.28
Second Quarter	$	12.60	$	10.49	$	13.84	$	10.17
Third Quarter	$	12.00	$	10.01	$	13.49	$	9.14
Fourth Quarter	$	14.43	$	10.72	$	13.43	$	9.38

Holders

At February 16, 2017, Cohu had 440 stockholders of record.

Dividends

We have paid consecutive quarterly dividends since 1977 and, as discussed below, expect to continue doing so. Cash dividends, per share, declared in 2016 and 2015 were as follows:

	Fiscal 2016		Fiscal 2015
First Quarter	$	0.06	$	0.06
Second Quarter	$	0.06	$	0.06
Third Quarter	$	0.06	$	0.06
Fourth Quarter	$	0.06	$	0.06
Total	$	0.24	$	0.24

We intend to continue to pay quarterly dividends subject to capital availability and periodic determinations by our Board of Directors that cash dividends are in the best interests of our stockholders. Our dividend policy may be affected by, among other items, our views on potential future capital requirements, including those related to research and development, investments and acquisitions, legal risks and stock repurchases.

Equity Compensation Plan Information

The following table summarizes information with respect to equity awards under Cohu’s equity compensation plans at December 31, 2016 (in thousands, except per share amounts):

Number of securities

Weighted average

Number of securities

to be issued upon

exercise price of

available for future issuance

exercise of outstanding

outstanding options,

under equity compensation

options, warrants and

warrants and rights

plans (excluding securities

Plan category

rights (a) (1)

(b) (2)

reflected in column (a))(c) (3)

Equity compensation plans approved by security holders

3,127

10.79

2,554

Equity compensation plans not approved by security holders

3,127

10.79

2,554

(1)

Includes options, restricted stock units (“RSUs”) and performance stock units (“PSUs”) outstanding under Cohu’s equity incentive plans. No stock warrants or other rights were outstanding as of December 31, 2016.

(2)

The weighted average exercise price of outstanding options, warrants and rights does not take RSUs and PSUs into account as RSUs and PSUs have a de minimus purchase price.

(3)

Includes 700,484 shares of common stock reserved for future issuance under the Cohu 1997 Employee Stock Purchase Plan.

For further details regarding Cohu’s equity compensation plans, see Note 6, “Employee Benefit Plans”, included in Part IV, Item 15(a) of this Form 10-K.

Comparative Stock Performance Graph

The information contained in this Stock Performance Graph section shall not be deemed to be “soliciting material” or “filed” with the SEC or subject to the liabilities of Section 18 of the Exchange Act except to the extent that Cohu specifically incorporates it by reference into a document filed under the Securities Act or the Exchange Act.

The graph below compares the cumulative total stockholder return on the common stock of Cohu for the last five fiscal years with the cumulative total return on custom Peer Group Indexes and a NASDAQ Market Index over the same period (assuming the investment of $100 in Cohu’s common stock, Peer Group Index and NASDAQ Market Index on December 31, 2011 and reinvestment of all dividends). The custom Peer Group Index is comprised of the peer group companies associated with our performance stock units issued under our equity incentive plan. In 2016 the custom Peer Group Index was comprised of Advanced Energy Industries Inc., Advantest Corp, ASM Pacific Technology Ltd, Axcelis Technologies Inc., BE Semiconductor Industries NV, Brooks Automation Inc., Cabot Microelectronics Corp, Camtek Ltd, Electro Scientific Industries Inc., FormFactor Inc., Kulicke and Soffa Industries Inc., Micronics Japan Co Ltd, MKS Instruments Inc., Nanometrics Inc., Photronics Inc., Rudolph Technologies Inc., Teradyne Inc., Ultra Clean Holdings Inc., Ultratech Inc., Veeco Instruments Inc. and Xcerra Corp. In 2015 the custom Peer Group Index was comprised of Advanced Energy Industries Inc., Advantest Corp, ASM Pacific Technology Ltd, Axcelis Technologies Inc., BE Semiconductor Industries NV, Brooks Automation Inc., Cabot Microelectronics Corp, Camtek Ltd, Electro Scientific Industries Inc., FormFactor Inc., Kulicke and Soffa Industries Inc., MKS Instruments Inc., Nanometrics Inc., Photronics Inc., Rudolph Technologies Inc., Teradyne Inc., Tessera Technologies Inc., Ultra Clean Holdings Inc., Ultratech Inc. and Xcerra Corp. This peer group is revised annually to reflect acquisitions and to include additional equivalent companies in the semiconductor equipment market to ensure a sufficiently large number of companies in the peer group composition to enable a meaningful comparison of our stock performance.

	2011		2012		2013		2014		2015		2016
Cohu, Inc.	$	100	$	94	$	93	$	113	$	125	$	137
NASDAQ Index	$	100	$	116	$	165	$	189	$	200	$	217
2015 Peer Group	$	100	$	116	$	130	$	152	$	141	$	198
2016 Peer Group	$	100	$	118	$	137	$	152	$	138	$	192

Item 6. Selected Financial Data.

The following selected financial data should be read in conjunction with Cohu’s Consolidated Financial Statements and notes thereto included in Part IV, Item 15(a) and with management’s discussion and analysis of financial condition and results of operations, included in Part II, Item 7. In June 2015, we sold our mobile microwave communications equipment business and in June 2014, we sold our video camera business. The operating results of these businesses are being presented as discontinued operations for all periods presented. Additional information related to the sale of these businesses is included in Note 4, “Discontinued Operations” in Part IV, Item 15(a) of this Form 10-K. On December 31, 2012, we purchased Ismeca Semiconductor Holding SA (“Ismeca”) and the results of its operations have been included in our Consolidated Financial Statements since that date.

All amounts presented below exclude any impact from the acquisition of Kita, which was completed on January 4, 2017, subsequent to the end of fiscal 2016. See Note 2, “Subsequent Event”, included in Part IV, Item 15(a) of this Form 10-K.

Years Ended,	Dec. 31		Dec. 26		Dec. 27		Dec. 28			Dec. 29
(in thousands, except per share data)		2016⁽¹⁾		2015		2014		2013			2012
Consolidated Statement of Operations Data:
Net sales	$	282,084	$	269,654	$	316,629	$	214,511		$	179,449
Income (loss) from continuing operations⁽²⁾	$	3,260	$	5,792	$	14,780	$	(28,548	)	$	(11,255	)
Net income (loss)	$	3,039	$	250	$	8,708	$	(33,418	)	$	(12,243	)
Income (loss) from continuing operations - basic	$	0.12	$	0.22	$	0.58	$	(1.15	)	$	(0.46	)
Income (loss) from continuing operations - diluted	$	0.12	$	0.22	$	0.57	$	(1.15	)	$	(0.46	)
Net income (loss) - basic	$	0.11	$	0.01	$	0.34	$	(1.34	)	$	(0.50	)
Net income (loss) - diluted	$	0.11	$	0.01	$	0.33	$	(1.34	)	$	(0.50	)
Cash dividends per share, paid quarterly	$	0.24	$	0.24	$	0.24	$	0.24		$	0.24
Consolidated Balance Sheet Data:
Total Consolidated Assets	$	345,512	$	345,346	$	344,765	$	345,423		$	334,873
Working Capital	$	176,460	$	171,272	$	142,194	$	125,837		$	184,703

(1)	The year ended December 31, 2016 consists of 53 weeks. All other years in the table above are comprised of 52 weeks.

(2)	Income from continuing operations for the year ended December 26, 2015 includes a gain on the sale of facility totaling $3.2 million.

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

OVERVIEW

Cohu is a leading supplier of semiconductor test and inspection handlers, micro-electro mechanical system (MEMS) test modules, test contactors and thermal sub-systems used by global semiconductor manufacturers and test subcontractors. Our business is significantly dependent on capital expenditures by semiconductor manufacturers and test subcontractors, which in turn is dependent on the current and anticipated market demand for semiconductors that is subject to seasonal trends. We expect that the semiconductor equipment industry will continue to be seasonal and volatile in part because consumer electronics, the principal end market for integrated circuits, is a highly dynamic industry and demand has traditionally fluctuated.

Orders for semiconductor test and assembly equipment as reported by Semiconductor Equipment and Materials International (SEMI) increased sequentially each month from October 2015 through January 2016 followed by declining orders in February and March 2016. The downward order momentum within the back-end equipment segment ceased in March 2016 with global orders for equipment increasing during the second quarter reaching a peak in June and then declining throughout the second half of the year until rebounding in December. Our net sales in 2016 were up 4.6% from 2015 and benefitted from demand for equipment for testing devices used in mobile, automotive and computing applications. We monitor our customers’ test floors, and equipment utilization increased slightly at the end of the year. Looking ahead, we see momentum in the automotive and mobile markets and are optimistic about the long-term prospects for the semiconductor equipment industry due to the increasing technological functionality of mobile devices, growing integrated circuit and LED content in automobiles and consumer products, and expanding applications in industrial. We are focused on growing our market share in the mobility, automotive and solid state markets and expanding into the test contacting and wafer level package test markets.

Application of Critical Accounting Estimates and Policies

Our discussion and analysis of our financial condition and results of operations is based upon our Consolidated Financial Statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. We base our estimates on historical experience, forecasts and on various other assumptions that are believed to be reasonable under the circumstances, however actual results may differ from those estimates under different assumptions or conditions. The methods, estimates and judgments we use in applying our accounting policies have a significant impact on the results we report in our financial statements. Some of our accounting policies require us to make difficult and subjective judgments, often as a result of the need to make estimates of matters that are inherently uncertain. Our critical accounting estimates that we believe are the most important to investors’ understanding of our financial results and condition and require complex management judgment include:

●

revenue recognition, including the deferral of revenue on sales to customers, which impacts our results of operations;

●

estimation of valuation allowances and accrued liabilities, specifically product warranty, inventory reserves and allowance for bad debts, which impact gross margin or operating expenses;

●

the recognition and measurement of current and deferred income tax assets and liabilities, unrecognized tax benefits and the valuation allowance on deferred tax assets, which impact our tax provision;

●

the assessment of recoverability of long-lived assets including goodwill and other intangible assets, which primarily impacts gross margin or operating expenses if we are required to record impairments of assets or accelerate their depreciation; and

●

the valuation and recognition of share-based compensation, which impacts gross margin, research and development expense, and selling, general and administrative expense.

Below, we discuss these policies further, as well as the estimates and judgments involved. We also have other policies that we consider key accounting policies; however, these policies typically do not require us to make estimates or judgments that are difficult or subjective.

Revenue Recognition: We generally recognize revenue upon shipment and title passage for established products (i.e., those that have previously satisfied customer acceptance requirements) that provide for full payment tied to shipment. Revenue for products that have not previously satisfied customer acceptance requirements or from sales where customer payment dates are not determinable is recognized upon customer acceptance. In certain instances, customer payment terms may provide that a minority portion (e.g. up to 20%) of the equipment purchase price be paid only upon customer acceptance. In those situations, the majority portion (e.g. 80%) of revenue where the contingent payment is tied to shipment and the entire product cost of sale are recognized upon shipment and passage of title and the minority portion of the purchase price related to customer acceptance is deferred and recognized upon receipt of customer acceptance. For arrangements containing multiple elements the revenue relating to the undelivered elements is deferred using the relative selling price method utilizing estimated sales prices until delivery of the deferred elements. We limit the amount of revenue recognition for delivered elements to the amount that is not contingent on the future delivery of products or services, future performance obligations or subject to customer-specified return or adjustment. On shipments where sales are not recognized, gross profit is generally recorded as deferred profit in our consolidated balance sheet, representing the difference between the receivable recorded and the inventory shipped.

Accounts Receivable: We maintain an allowance for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. If the financial condition of our customers deteriorates, resulting in an impairment of their ability to make payments, additional allowances may be required.

Warranty: We provide for the estimated costs of product warranties in the period sales are recognized. Our warranty obligation estimates are affected by historical product shipment levels, product performance, and material and labor costs incurred in correcting product performance problems. Should product performance, material usage or labor repair costs differ from our estimates, revisions to the estimated warranty liability would be required.

Inventory: The valuation of inventory requires us to estimate obsolete or excess inventory as well as inventory that is not of saleable quality. The determination of obsolete or excess inventory requires us to estimate the future demand for our products. The demand forecast is a direct input in the development of our short-term manufacturing plans. We record valuation reserves on our inventory for estimated excess and obsolete inventory and lower of cost or market concerns equal to the difference between the cost of inventory and the estimated market value based upon assumptions about future product demand, market conditions and product selling prices. If future product demand, market conditions or product selling prices are less than those projected by management or if continued modifications to products are required to meet specifications or other customer requirements, increases to inventory reserves may be required, which would have a negative impact on our gross margin.

Income Taxes: We estimate our liability for income taxes based on the various jurisdictions where we conduct business. This requires us to estimate our (i) current taxes; (ii) temporary differences that result from differing treatment of certain items for tax and accounting purposes and (iii) unrecognized tax benefits. Temporary differences result in deferred tax assets and liabilities that are reflected in the consolidated balance sheet. The deferred tax assets are reduced by a valuation allowance if, based upon all available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized. Establishing, reducing or increasing a valuation allowance in an accounting period generally results in an increase or decrease in tax expense in the statement of operations. We must make significant judgments to determine the provision for income taxes, deferred tax assets and liabilities, unrecognized tax benefits and any valuation allowance to be recorded against deferred tax assets. Our gross deferred tax asset balance as of December 31, 2016 was approximately $47.3 million, with a valuation allowance of approximately $44.7 million. Our deferred tax assets consist primarily of reserves and accruals that are not yet deductible for tax and tax credit and net operating loss carry-forwards.

Segment Information: We applied the provisions of Accounting Standards Codification (“ASC”) Topic 280, Segment Reporting, (“ASC 280”), which sets forth a management approach to segment reporting and establishes requirements to report selected segment information quarterly and to report annually entity-wide disclosures about products, major customers and the geographies in which the entity holds material assets and reports revenue. An operating segment is defined as a component that engages in business activities whose operating results are reviewed by the chief operating decision maker and for which discrete financial information is available. Based on the provisions of ASC 280, we have determined that our identified operating segments qualify for aggregation under ASC 280 due to similarities in their customers, their economic characteristics, and the nature of products and services provided. As a result, we report in one segment, semiconductor equipment.

Goodwill, Purchased Intangible Assets and Other Long-lived Assets: We evaluate goodwill for impairment annually and when an event occurs or circumstances change that indicate that the carrying value may not be recoverable. We test goodwill for impairment by first comparing the book value of net assets to the fair value of the reporting units. If the fair value is determined to be less than the book value, a second step is performed to compute the amount of impairment as the difference between the estimated fair value of goodwill and the carrying value. We estimated the fair values of our reporting units primarily using the income approach valuation methodology that includes the discounted cash flow method, taking into consideration the market approach and certain market multiples as a validation of the values derived using the discounted cash flow methodology. Forecasts of future cash flows are based on our best estimate of future net sales and operating expenses, based primarily on customer forecasts, industry trade organization data and general economic conditions.

We conduct our annual impairment test as of October 1st of each year, and have determined there is no impairment as of October 1, 2016 as we determined that the estimated fair values of our reporting units exceeded their carrying values on that date. Other events and changes in circumstances may also require goodwill to be tested for impairment between annual measurement dates. As of December 31, 2016 we do not believe there have been any events or circumstances that would require us to perform an interim goodwill impairment review. In the event we determine that an interim goodwill impairment review is required, in a future period, the review may result in an impairment charge, which would have a negative impact on our results of operations.

Long-lived assets, other than goodwill, are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of the assets might not be recoverable. Conditions that would necessitate an impairment assessment include a significant decline in the observable market value of an asset, a significant change in the extent or manner in which an asset is used, or any other significant adverse change that would indicate that the carrying amount of an asset or group of assets may not be recoverable. For long-lived assets, impairment losses are only recorded if the asset’s carrying amount is not recoverable through its undiscounted, probability-weighted future cash flows. We measure the impairment loss based on the difference between the carrying amount and estimated fair value.

Contingencies: We are subject to certain contingencies that arise in the ordinary course of our businesses which require us to assess the likelihood that future events will confirm the existence of a loss or an impairment of an asset. If a loss or asset impairment is probable and the amount of the loss or impairment is reasonably estimable, we accrue a charge to operations in the period such conditions become known.

Share-based Compensation: Share-based compensation expense related to stock options is recorded based on the fair value of the award on its grant date, which we estimate using the Black-Scholes valuation model. Share-based compensation expense related to restricted stock unit awards is calculated based on the market price of our common stock on the grant date, reduced by the present value of dividends expected to be paid on our common stock prior to vesting of the restricted stock unit. Share-based compensation on performance stock units with market-based goals is calculated using a Monte Carlo simulation model on the date of the grant. Share-based compensation for the year ended December 31, 2016 was impacted by our adoption of Accounting Standards Update (“ASU”) No. 2016-09, Compensation - Stock Compensation (Topic 718): Improvements to Employee Share-Based Payment Accounting (ASU 2016-09) in the fourth quarter of 2016. For further information regarding our adoption of ASU 2016-09 please see Note 1, “Recent Accounting Pronouncements” in Part IV, Item 15(a) of this Form 10-K.

Recent Accounting Pronouncements: For a description of accounting changes and recent accounting pronouncements, including the expected dates of adoption and estimated effects, if any, on our Consolidated Financial Statements, see Note 1, "Recent Accounting Pronouncements" in Part IV, Item 15(a) of this Form 10-K.

RESULTS OF OPERATIONS

In June 2015, we sold our mobile microwave communications equipment business and in June 2014, we sold our video camera business. The operating results of these businesses are being presented as discontinued operations and all prior period amounts have been reclassified. Unless otherwise indicated, the discussion below covers the comparative results from continuing operations.

The following table summarizes certain operating data as a percentage of net sales:

	2016			2015			2014
Net sales		100.0	%		100.0	%		100.0	%
Cost of sales		(66.4	)		(67.0	)		(66.5	)
Gross margin		33.6			33.0			33.5
Research and development		(12.4	)		(12.3	)		(11.4	)
Selling, general and administrative		(19.3	)		(19.0	)		(16.0	)
Gain on sale of facility		-			1.2			-
Income from operations		1.9	%		2.9	%		6.1	%

2016 Compared to 2015

Net Sales

Cohu’s consolidated net sales increased 4.6% from $269.7 million in 2015 to $282.1 million in 2016. Our consolidated net sales in 2016 are up from 2015 and reflect the improving business conditions in the semiconductor industry and demand for equipment for testing devices used in mobile, automotive and computing applications.

Gross Margin

Gross margin consists of net sales less cost of sales. Cost of sales consists primarily of the materials, assembly and test labor and overhead from operations. Our gross margin can fluctuate due to a number of factors, including, but not limited to, the mix of products sold, product support costs, increase to inventory reserves or the sale of previously reserved inventory and utilization of manufacturing capacity. Our gross margin, as a percentage of net sales, increased to 33.6% in 2016 from 33.0% in 2015.

We compute the majority of our excess and obsolete inventory reserve requirements using a one-year inventory usage forecast. During 2016 and 2015, we recorded net charges to cost of sales of approximately $1.1 million and $2.4 million, respectively, for excess and obsolete inventory. While we believe our reserves for excess and obsolete inventory and lower of cost or market concerns are adequate to cover known exposures at December 31, 2016, reductions in customer forecasts or continued modifications to products, as a result of our failure to meet specifications or other customer requirements, may result in additional charges to operations that could negatively impact our gross margin in future periods.

Research and Development Expense (“R&D Expense”)

R&D expense consists primarily of salaries and related costs of employees engaged in ongoing research, product design and development activities, costs of engineering materials and supplies and professional consulting expenses. Our future operating results depend, to a considerable extent, on our ability to maintain a competitive advantage in the products we provide, and historically we have maintained our commitment to investing in R&D in order to be able to continue to offer new products to our customers. R&D expense in 2016 was $34.8 million, or 12.4% of net sales, increasing from $33.1 million, or 12.3% of net sales in 2015. New product development programs resulted in higher R&D labor and material expense being incurred in 2016. These increased costs were partially offset by $1.6 million of development cost reimbursements received under a cost-sharing arrangement entered into with a customer in the first quarter of 2016.

Selling, General and Administrative Expense (“SG&A Expense”)

SG&A expense consists primarily of salaries and benefit costs of employees, commission expense for independent sales representatives, product promotion and costs of professional services. SG&A expense as a percentage of net sales increased to 19.3% in 2016, from 19.0% in 2015, increasing from $51.2 million in 2015 to $54.3 million in 2016. Our SG&A expense in 2016 was higher as a result of increased business volume, and during the year we incurred $1.8 million of costs associated with our acquisition of Kita. SG&A expense in 2016 also includes $0.6 million of expense related to a reduction of an indemnification receivable related to an uncertain tax position recorded in the Ismeca acquisition. In connection with this reduction we also booked a corresponding amount as a credit to our income tax provision and, as a result, the impact of this reduction on net income was zero. Employee share based compensation expense was $0.4 million higher in 2016, driven primarily by the number of employee stock options and restricted and performance share awards subject to vesting during the period and the corresponding valuation that was established on the date of grant. Costs incurred in connection with transitioning our manufacturing to Asia and employee severance were $1.4 million and $1.0 million in 2016 and 2015, respectively.

Over the last two years our SG&A expense has benefitted from the strengthening of the U.S. Dollar, which resulted in the recognition of $2.6 million and $1.4 million in foreign currency transaction gains in 2016 and 2015, respectively.

Gain on Sale of Facility

On December 4, 2015, we completed the sale of our headquarters facility located in Poway, California for $34.1 million. After payment of commissions and other fees associated with the sale we realized net cash proceeds of $33.3 million, which resulted in a total gain of $18.5 million. We accounted for this transaction in accordance with ASC subtopic 840-40, Sale-leaseback transactions, and recognized a gain on the completion of the sale totaling $3.2 million. The portion of the gain not recognized at the time the sale was completed has been deferred and is being recognized on a straight-line basis over the 10-year term of the lease in line with the recognition of rental expense related to the lease. During 2016, we amortized $2.0 million of the deferred gain to income.

Income Taxes

The income tax provision expressed as a percentage of pre-tax income in 2016 and 2015 was 45.7% and 27.6%, respectively. The income tax provision for the years ended December 31, 2016 and December 26, 2015 differs from the U.S. federal statutory rate primarily due to releases from statute expirations, non-deductible transaction costs, tax credits, changes in the valuation allowance on our deferred tax assets, foreign income taxed at different rates and other factors.

Companies are required to assess whether a valuation allowance should be recorded against their deferred tax assets (“DTAs”) based on the consideration of all available evidence, using a “more likely than not” realization standard. The four sources of taxable income that must be considered in determining whether DTAs will be realized are, (1) future reversals of existing taxable temporary differences (i.e. offset of gross deferred tax assets against gross deferred tax liabilities); (2) taxable income in prior carryback years, if carryback is permitted under the tax law; (3) tax planning strategies and (4) future taxable income exclusive of reversing temporary differences and carryforwards.

In assessing whether a valuation allowance is required, significant weight is to be given to evidence that can be objectively verified. We have evaluated our DTAs each reporting period, including an assessment of our cumulative income or loss over the prior three-year period and future periods, to determine if a valuation allowance was required. A significant negative factor in our assessment was Cohu's three-year cumulative U.S. loss history at the end of various fiscal periods including 2016.

As a result of our cumulative, three-year U.S. GAAP pretax loss from continuing operations of approximately $17.6 million at the end of 2016, and our U.S. loss in 2016, we were unable to conclude at December 31, 2016 that it was “more likely than not” that our U.S. DTAs would be realized. We will evaluate the realizability of our DTAs at the end of each quarterly reporting period in 2017 and, should circumstances change, it is possible the remaining valuation allowance, or a portion thereof, will be reversed in a future period.

Our valuation allowance on our DTAs at December 31, 2016 and December 26, 2015 was approximately $44.7 million and $42.3 million, respectively. The remaining gross DTAs for which a valuation allowance was not recorded are realizable primarily through future reversals of existing taxable temporary differences. As the realization of DTAs is determined by tax jurisdiction, the deferred tax liabilities recorded as part of the 2008 acquisition of Rasco, a German corporation, and the fiscal 2013 acquisition of Ismeca, a Swiss Corporation, were not a source of taxable income in assessing the realization of our DTAs in the U.S.

For a full reconciliation of our effective tax rate to the U.S. federal statutory rate and further explanation of our provision for income taxes, see Note 7, “Income Taxes”, included in Part IV, Item 15(a) of this Form 10-K, which is incorporated herein by reference.

Income from Continuing Operations and Net Income

As a result of the factors set forth above, our income from continuing operations was $3.3 million in 2016, compared to $5.8 million in 2015. Including the results of our discontinued operations, our net income in 2016 was $3.0 million as compared to $0.3 million in 2015.

2015 Compared to 2014

Net Sales

Cohu’s consolidated net sales decreased 14.8% from $316.6 million in 2014 to $269.7 million in 2015 as a result of decreased global demand for back-end semiconductor test and assembly equipment, consistent with the broader market.

Gross Margin

Our gross margin, as a percentage of net sales, decreased to 33.0% in 2015 from 33.5% in 2014. During 2015 and 2014, we recorded net charges to cost of sales of approximately $2.4 million and $2.6 million, respectively, for excess and obsolete inventory.

R&D Expense

R&D expense in 2015 was $33.1 million, or 12.3% of net sales, decreasing from $36.0 million, or 11.4% of net sales in 2014. The reduction in 2015 was a result of the completion of certain development programs, as planned, and headcount reductions.

SG&A Expense

SG&A expense as a percentage of net sales increased to 19.0% in 2015, from 16.0% in 2014, increasing from $50.6 million in 2014 to $51.2 million in 2015. We have benefitted from the strengthening of the U.S. Dollar, which resulted in the recognition of $1.4 million and $2.0 million in foreign currency gains in 2015 and 2014 respectively. We incurred $1.0 million and $1.4 million of costs in connection with transitioning our manufacturing to Asia and employee severance, in 2015 and 2014, respectively. In 2015 we recognized an additional $1.1 million of employee share based compensation expense. This amount was driven primarily by the number of employee stock options and restricted and performance share awards subject to vesting during the period and the corresponding valuation that was established on the date of grant.

Gain on Sale of Facility

Income Taxes

The income tax provision expressed as a percentage of pre-tax income in 2015 and 2014 was 27.6% and 23.9%, respectively. The income tax provision for the years ended December 26, 2015 and December 27, 2014 differs from the U.S. federal statutory rate primarily due to tax credits, changes in the valuation allowance on our deferred tax assets, foreign income taxed at different rates and other factors.

Income from Continuing Operations and Net Income

As a result of the factors set forth above, our income from continuing operations was $5.8 million in 2015, compared to $14.8 million in 2014. Including the results of our discontinued operations, our net income in 2015 was $0.3 million as compared to $8.7 million in 2014.

LIQUIDITY AND CAPITAL RESOURCES

Our business is dependent on capital expenditures by semiconductor manufacturers and test subcontractors that are, in turn, dependent on the current and anticipated market demand for semiconductors. The seasonal and volatile nature of demand for semiconductor equipment, our primary industry, makes estimates of future revenues, results of operations and net cash flows difficult.

Our primary historical source of liquidity and capital resources has been cash flow generated by our operations and we manage our business to maximize operating cash flows as our primary source of liquidity. We use cash to fund growth in our operating assets and to fund new products and product enhancements primarily through research and development. We believe that our sources of liquidity will be sufficient to satisfy our anticipated cash requirements through at least the next 12 months. Our liquidity could be negatively affected by a decrease in demand for our products. In addition, we may make acquisitions or increase our capital expenditures and may need to raise additional capital through debt or equity financing to provide for greater flexibility to fund these activities. Additional financing may not be available or on terms favorable to us.

Liquidity

Working Capital: The following summarizes our cash, cash equivalents, short-term investments and working capital at December 31, 2016 and December 26, 2015:

(in thousands)	2016		2015		Increase		Percentage Change
Cash, cash equivalents and short-term investments	$	128,035	$	117,022	$	11,013		9	%
Working capital	$	176,460	$	171,272	$	5,188		3	%

As of December 31, 2016, $68.9 million of our cash and cash equivalents was held by our foreign subsidiaries. If these funds are needed for our operations in the U.S., we may be required to accrue and pay U.S. taxes or foreign withholding taxes if we repatriate these funds. U.S. income taxes have not been provided on approximately $49 million of accumulated undistributed earnings of certain foreign subsidiaries, as we currently intend to indefinitely reinvest these earnings in operations outside the U.S. We repatriated $17.4 million from our Singapore subsidiary in 2016 due to the reduction in business activity of that operation. Our intent is to continue to indefinitely reinvest the remaining funds in our foreign operations and we have no current plans that would require us to repatriate these funds to the U.S. It is not practicable to estimate the amount of tax that might be payable if some or all of such earnings were to be remitted.

Cash Flows

Operating Activities: Cash provided by operating activities consists of net income adjusted for non-cash expenses and changes in operating assets and liabilities. Adjustments include the loss from our divestiture of BMS, depreciation expense on property, plant and equipment, amortization of intangible assets, share-based compensation expense, and deferred income taxes. Our net cash flows provided by operating activities in 2016 totaled $24.5 million compared to $21.5 million in 2015. Cash provided by operating activities also was impacted by changes in current assets and liabilities which included increases in accounts receivable of $4.6 million, accounts payable of $5.7 million and deferred profit of $3.3 million and decreases in inventories of $4.6 million and income taxes payable of $2.0 million. The increase in accounts receivable resulted from increased business volume and a sequential increase in product shipments in the fourth quarter of 2016. The increase in accounts payable resulted from increased business volume in the fourth quarter of 2016 and the timing of payments made to our suppliers. Deferred profit increased as a result of the deferral of revenue related to equipment shipments in accordance with our revenue recognition policy. Inventories decreased as a result of product shipments and improved inventory and supply chain management and income taxes payable decreased as a result of payments made.

Investing Activities: Investing cash flows consist primarily of cash used for capital expenditures in support of our business, purchases of investments, proceeds from investment maturities, business acquisitions, asset disposals and business divestitures. Our net cash used in investing activities in 2016 totaled $32.9 million and was primarily the result of $50.6 million in cash used for purchases of short-term investments offset by $20.2 million in net proceeds from sales and maturities of short-term investments. We invest our excess cash, in an attempt to seek the highest available return while preserving capital, in short-term investments since excess cash may be required for a business-related purpose. Additions to property, plant and equipment in 2016 were $3.5 million and were made to support our operating and development activities.

Financing Activities: Cash used in financing activities consisted of amounts distributed to our stockholders in the form of cash dividends. During 2016, we paid dividends totaling $6.4 million, or $0.24 per common share. On February 16, 2017 we announced a cash dividend of $0.06 per share on our common stock, payable on April 14, 2017 to stockholders of record as of February 28, 2017. We intend to continue to pay quarterly dividends subject to capital availability and periodic determinations by our Board of Directors that cash dividends are in the best interests of our stockholders. Partially offsetting cash used in the payment of dividends were the net proceeds from the issuance of our common stock under our equity incentive and employee stock purchase plans, which totaled $0.4 million during 2016. We issue stock options and maintain an employee stock purchase plan as components of our overall employee compensation.

Capital Resources

We have a secured letter of credit facility (the “Secured Facility”) under which Bank of America, N.A., has agreed to administer the issuance of letters of credit on behalf of Cohu and our subsidiaries. The Secured Facility requires us to maintain deposits of cash or other approved investments, which serve as collateral, in amounts that approximate our outstanding standby letters of credit. As of December 31, 2016, no amounts were outstanding under standby letters of credit. Our wholly owned subsidiary Ismeca Semiconductor Holdings SA (“Ismeca”) has agreements with Credit Suisse and UBS (the “Ismeca Facility”) under which they administer lines of credit on behalf of Ismeca. Total borrowings available under the Ismeca Facility are 2.5 million Swiss Francs and at December 31, 2016 no amounts were outstanding.

We expect that we will continue to make capital expenditures to support our business and we anticipate that present working capital will be sufficient to meet our operating requirements for at least the next twelve months.

Contractual Obligations

The following table summarizes our significant contractual obligations at December 31, 2016, and the effect such obligations are expected to have on our liquidity and cash flows in future periods. This table excludes amounts already recorded on our balance sheet as current liabilities at December 31, 2016. Amounts excluded include our liability for unrecognized tax benefits that totaled approximately $10.1 million at December 31, 2016. We are currently unable to provide a reasonably reliable estimate of the amount or period(s) the cash settlement of this liability may occur.

(in thousands)	2017		2018		2019		2020		2021		Thereafter		Total
Non-cancelable
operating leases	$	3,051	$	2,527	$	2,237	$	2,259	$	2,299	$	8,695	$	21,068

The table above does not include pension, post-retirement benefit and warranty obligations because it is not certain when these liabilities will be funded. For additional information regarding our pension and post-retirement benefits obligations see Note 6, “Employee Benefit Plans” and for more information on our contractual obligations, see Note 10, “Guarantees” in Part IV, Item 15(a) of this Form 10-K.

Commitments to contract manufacturers and suppliers. From time to time, we enter into commitments with our vendors and outsourcing partners to purchase inventory at fixed prices or in guaranteed quantities. We are not able to determine the aggregate amount of such purchase orders that represent contractual obligations, as purchase orders may represent authorizations to purchase rather than binding agreements. Our purchase orders are based on our current manufacturing needs and are fulfilled by our vendors within relatively short time horizons. We typically do not have significant agreements for the purchase of raw materials or other goods specifying minimum quantities or set prices that exceed our expected requirements for the next three months.

Off-Balance Sheet Arrangements. During the ordinary course of business, we provide standby letters of credit instruments to certain parties as required. As of December 31, 2016, no amounts were outstanding under standby letters of credit.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk.

Investment and Interest Rate Risk.

At December 31, 2016, our investment portfolio included short-term, fixed-income investment securities with a fair value of approximately $32.0 million. These securities are subject to interest rate risk and will likely decline in value if interest rates increase. Our future investment income may fall short of expectations due to changes in interest rates or we may suffer losses in principal if we are forced to sell securities that decline in market value due to changes in interest rates. As we classify our short-term securities as available-for-sale, no gains or losses are recognized due to changes in interest rates unless such securities are sold prior to maturity or declines in fair value are determined to be other-than-temporary. Due to the relatively short duration of our investment portfolio, an immediate ten percent change in interest rates would have no material impact on our financial condition or results of operations.

We evaluate our investments periodically for possible other-than-temporary impairment by reviewing factors such as the length of time and extent to which fair value has been below cost basis, the financial condition of the issuer and our ability and intent to hold the investment for a period of time sufficient for anticipated recovery of market value. As of December 31, 2016, we had $26.6 million investments with loss positions. We evaluated the nature of these investments, credit worthiness of the issuer and the duration of these impairments and concluded that these losses were temporary and we have the ability and intent to hold these investments to maturity.

Foreign Currency Exchange Risk.

We have operations in several foreign countries and conduct business in the local currency in these countries. As a result, we have risk associated with currency fluctuations as the value of foreign currencies fluctuate against the U.S. dollar, in particular the Swiss Franc, Euro, Malaysian Ringgit, Chinese Yuan, Philippine Peso and, with the acquisition of Kita, the Japanese Yen. These fluctuations can impact our reported earnings.

Fluctuations in currency exchange rates also impact the U.S. Dollar amount of our net investment in foreign operations. The assets and liabilities of our foreign subsidiaries are translated into U.S. Dollars at the exchange rates in effect at the fiscal year-end balance sheet date. Income and expense accounts are translated at an average exchange rate during the year which approximates the rates in effect at the transaction dates. The resulting translation adjustments are recorded in stockholders’ equity as a component of accumulated other comprehensive income. As a result of fluctuations in certain foreign currency exchange rates in relation to the U.S. Dollar as of December 31, 2016 compared to December 26, 2015, our stockholders’ equity decreased by $5.8 million as a result of the foreign currency translation.

Based upon the current levels of net foreign assets, a hypothetical 10% devaluation of the U.S. dollar as compared to these currencies as of December 31, 2016 would result in an approximate $16.2 million positive translation adjustment recorded in other comprehensive income within stockholders’ equity. Conversely, a hypothetical 10% appreciation of the U.S. dollar as compared to these currencies as of December 31, 2016 would result in an approximate $16.2 million negative translation adjustment recorded in other comprehensive income within stockholders’ equity.

Item 8. Financial Statements and Supplementary Data.

The information required by this Item is included in Part IV, Item 15(a).

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure.

None.

Item 9A. Controls and Procedures.

Conclusion Regarding the Effectiveness of Disclosure Controls and Procedures - Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we conducted an evaluation of our disclosure controls and procedures, as such term is defined under Rules 13a-15(e) and 15d-15(e) promulgated under the Securities Exchange Act of 1934, as amended (the “Exchange Act”). Based on this evaluation, our principal executive officer and our principal financial officer concluded that our disclosure controls and procedures were effective as of December 31, 2016, the end of the period covered by this annual report.

Management’s Annual Report on Internal Control Over Financial Reporting - Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f). Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting based on the framework in Internal Control - Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework). Based on our evaluation under the framework in Internal Control - Integrated Framework, our management concluded that our internal control over financial reporting was effective as of December 31, 2016.

Ernst & Young LLP, the independent registered public accounting firm that audited the Consolidated Financial Statements included in this Annual Report on Form 10-K, has also audited the effectiveness of our internal control over financial reporting as of December 31, 2016, as stated in their report which is included herein.

Report of Independent Registered Public Accounting Firm

The Board of Directors and Stockholders

Cohu, Inc.

We have audited Cohu, Inc.’s internal control over financial reporting as of December 31, 2016, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) (the COSO criteria). Cohu, Inc.’s management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Annual Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, Cohu, Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2016, based on the COSO criteria.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Cohu, Inc. as of December 31, 2016 and December 26, 2015, and the related consolidated statements of income, comprehensive loss, stockholders’ equity, and cash flows for each of the three years in the period ended December 31, 2016 of Cohu, Inc. and our report dated March 2, 2017 expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP

San Diego, California

March 2, 2017

Changes in Internal Control Over Financial Reporting – There have been no changes in our internal control over financial reporting that occurred during the fourth quarter of 2016 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Item 9B. Other Information.

None.

PART III

Item 10. Directors, Executive Officers and Corporate Governance.

The information under the heading “Executive Officers of the Registrant” in Part I, Item 1 of this Form 10-K is incorporated by reference in this section. The other information required by this item is hereby incorporated by reference to the Company’s definitive proxy statement, which will be filed with the Securities and Exchange Commission ("SEC") within 120 days after the close of fiscal 2016.

Code of Business Conduct and Code of Ethics

Cohu has adopted a code of business conduct and ethics for directors, officers and employees. The code is available on the Investor Relations section of our website at www.cohu.com. We intend to make all required disclosures concerning any amendments to, or waivers from, our code of ethics on our website.

Corporate Governance Guidelines and Certain Committee Charters

Cohu has adopted Corporate Governance Guidelines as well as charters for its Audit, Compensation and Nominating and Governance Committees. These documents are available on the Investor Relations section of our website at www.cohu.com.

The information on our website is not incorporated by reference in or considered to be a part of this Annual Report on Form 10-K.

Item 11. Executive Compensation.

Information regarding Executive Compensation is hereby incorporated by reference to the Company’s definitive proxy statement, which will be filed with the SEC within 120 days after the close of fiscal 2016.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.

Information regarding Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters is hereby incorporated by reference to the Company’s definitive proxy statement, which will be filed with the SEC within 120 days after the close of fiscal 2016.

Item 13. Certain Relationships and Related Transactions, and Director Independence.

Information regarding Certain Relationships and Related Transactions, and Director Independence is hereby incorporated by reference to the Company’s definitive proxy statement, which will be filed with the SEC within 120 days after the close of fiscal 2016.

Item 14. Principal Accounting Fees and Services.

Information regarding the Principal Accounting Fees and Services is hereby incorporated by reference to the Company’s definitive proxy statement, which will be filed with the SEC within 120 days after the close of fiscal 2016.

PART IV

Item 15. Exhibits, Financial Statement Schedules.

(a)	The following documents are filed as part of, or incorporated by reference into, this Annual Report on Form 10-K.

(1)

Financial Statements

The following Consolidated Financial Statements of Cohu, Inc., including the report thereon of Ernst & Young LLP, are included in this Annual Report on Form 10-K beginning on page 30:

	Form 10-K
Description	Page Number

Consolidated Balance Sheets at December 31, 2016 and December 26, 2015	30

Consolidated Statements of Income for each of the three years in the period ended December 31, 2016	31

Consolidated Statements of Comprehensive Loss for each of the three years in the period ended December 31, 2016	32

Consolidated Statements of Stockholders’ Equity for each of the three years in the period ended December 31, 2016	33

Consolidated Statements of Cash Flows for each of the three years in the period ended December 31, 2016	34

Notes to Consolidated Financial Statements	35

Report of Independent Registered Public Accounting Firm	55

(2)

Financial Statement Schedule

Schedule II – Valuation and Qualifying Accounts

All other financial statement schedules have been omitted because the required information is not applicable or not present in amounts sufficient to require submission of the schedule, or because the information required is included in the Consolidated Financial Statements or the notes thereto.

(3)

Exhibits

The exhibits listed under Item 15(b) hereof are filed with, or incorporated by reference into, this Annual Report on Form 10-K.

COHU, INC.

CONSOLIDATED BALANCE SHEETS

(in thousands, except par value)

	December 31,			December 26,
	2016			2015
ASSETS

Current assets:
Cash and cash equivalents	$	96,045		$	115,370
Short-term investments		31,990			1,652
Accounts receivable, net		63,019			59,832
Inventories:
Raw materials and purchased parts		23,037			24,423
Work in process		17,599			20,124
Finished goods		4,866			6,801
		45,502			51,348
Other current assets		8,593			6,261
Total current assets		245,149			234,463

Property plant and equipment, net		18,234			19,000
Goodwill		58,849			60,264
Intangible assets, net		17,835			25,297
Other assets		5,445			6,322
	$	345,512		$	345,346

LIABILITIES AND STOCKHOLDERS' EQUITY

Current liabilities:
Accounts payable	$	31,444		$	27,290
Accrued compensation and benefits		14,770			15,628
Accrued warranty		3,737			3,785
Deferred profit		6,886			3,730
Income taxes payable		1,920			4,195
Other accrued liabilities		9,932			8,563
Total current liabilities		68,689			63,191

Accrued retirement benefits		15,673			15,397
Noncurrent deferred gain on sale of facility		11,689			13,142
Deferred income taxes		5,852			6,954
Noncurrent income tax liabilities		6,375			6,761
Other accrued liabilities		1,765			1,764
Commitments and contingencies
Stockholders' equity:
Preferred stock, $1 par value; 1,000 shares authorized, none issued		-			-
Common stock, $1 par value; 60,000 shares authorized, 26,842 shares issued and outstanding in 2016 and 26,240 shares in 2015		26,842			26,240
Paid-in capital		111,950			105,516
Retained earnings		124,559			128,153
Accumulated other comprehensive loss		(27,882	)		(21,772	)
Total stockholders' equity		235,469			238,137
	$	345,512		$	345,346

COHU, INC.

CONSOLIDATED STATEMENTS OF INCOME

(in thousands, except per share amounts)

	Years ended
	December 31,			December 26,			December 27,
	2016			2015			2014
Net sales	$	282,084		$	269,654		$	316,629
Cost and expenses:
Cost of sales		187,256			180,616			210,657
Research and development		34,841			33,107			36,018
Selling, general and administrative		54,322			51,170			50,551
Gain on sale of facility		-			(3,198	)		-
		276,419			261,695			297,226
Income from operations		5,665			7,959			19,403
Interest income		342			44			30
Income from continuing operations before taxes		6,007			8,003			19,433
Income tax provision		2,747			2,211			4,653
Income from continuing operations		3,260			5,792			14,780
Loss from discontinued operations, net of tax		(221	)		(5,542	)		(6,072	)
Net income	$	3,039		$	250		$	8,708

Income (loss) per share:
Basic:
Income from continuing operations	$	0.12		$	0.22		$	0.58
Loss from discontinued operations		(0.01	)		(0.21	)		(0.24	)
Net income	$	0.11		$	0.01		$	0.34

Diluted:
Income from continuing operations	$	0.12		$	0.22		$	0.57
Loss from discontinued operations		(0.01	)		(0.21	)		(0.24	)
Net income	$	0.11		$	0.01		$	0.33


Weighted average shares used in computing income (loss) per share:
Basic		26,659			26,057			25,393
Diluted		27,480			26,788			26,006

COHU, INC.

CONSOLIDATED STATEMENTS OF COMPREHENSIVE LOSS

(in thousands)

	Years ended
	December 31,			December 26,			December 27,
	2016			2015			2014
Net income	$	3,039		$	250		$	8,708
Other comprehensive loss, net of tax
Foreign currency translation adjustments		(5,789	)		(11,000	)		(14,107	)
Adjustments related to postretirement benefits		(316	)		(58	)		(3,258	)
Change in unrealized gain/loss on investments		(5	)		-			-
Other comprehensive loss, net of tax		(6,110	)		(11,058	)		(17,365	)
Comprehensive loss	$	(3,071	)	$	(10,808	)	$	(8,657	)

COHU, INC.

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

(in thousands, except par value and per share amounts)

										Accumulated
	Common									other
	stock			Paid-in			Retained			comprehensive
	$1 par value			capital			earnings			loss			Total
Balance at December 28, 2013	$	25,080		$	89,883		$	131,546		$	6,651		$	253,160
Net income		-			-			8,708			-			8,708
Changes in cumulative translation adjustment		-			-			-			(14,107	)		(14,107	)
Adjustments related to postretirement benefits, net of tax		-			-			-			(3,258	)		(3,258	)
Cash dividends - $0.24 per share		-			-			(6,102	)		-			(6,102	)
Exercise of stock options		237			1,764			-			-			2,001
Shares issued under employee stock purchase plan		139			1,001			-			-			1,140
Shares issued for restricted stock units vested		353			(353	)		-			-			-
Repurchase and retirement of stock		(117	)		(1,133	)		-			-			(1,250	)
Share-based compensation expense		-			6,776			-			-			6,776
Balance at December 27, 2014		25,692			97,938			134,152			(10,714	)		247,068
Net income		-			-			250			-			250
Changes in cumulative translation adjustment		-			-			-			(11,000	)		(11,000	)
Adjustments related to postretirement benefits, net of tax		-			-			-			(58	)		(58	)
Cash dividends - $0.24 per share		-			-			(6,249	)		-			(6,249	)
Exercise of stock options		175			1,335			-			-			1,510
Shares issued under employee stock purchase plan		123			977			-			-			1,100
Shares issued for restricted stock units vested		377			(377	)		-			-			-
Repurchase and retirement of stock		(127	)		(1,250	)		-			-			(1,377	)
Share-based compensation expense		-			6,893			-			-			6,893
Balance at December 26, 2015		26,240			105,516			128,153			(21,772	)		238,137
Cumulative effect of accounting change^(a)		-			249			(249	)		-			-
Net income		-			-			3,039			-			3,039
Changes in cumulative translation adjustment		-			-			-			(5,789	)		(5,789	)
Adjustments related to postretirement benefits, net of tax		-			-			-			(316	)		(316	)
Changes in unrealized gains and losses on investments, net of tax		-			-			-			(5	)		(5	)
Cash dividends - $0.24 per share		-			-			(6,384	)		-			(6,384	)
Exercise of stock options		101			694			-			-			795
Shares issued under employee stock purchase plan		111			959			-			-			1,070
Shares issued for restricted stock units vested		581			(581	)		-			-			-
Repurchase and retirement of stock		(191	)		(2,030	)		-			-			(2,221	)
Share-based compensation expense		-			7,143			-			-			7,143
Balance at December 31, 2016	$	26,842		$	111,950		$	124,559		$	(27,882	)	$	235,469

(a)

Cumulative effect of accounting change relates to our adoption of ASU 2016-09. Please refer to Note 1 of the Consolidated Financial Statements for further detail on the adoption of this accounting standard.

COHU, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

(in thousands)

	Years ended
	December 31,			December 26,			December 27,
	2016			2015			2014
Cash flows from operating activities:
Net income	$	3,039		$	250		$	8,708
Adjustments to reconcile net income to net cash provided by operating activities:
Loss on disposal of microwave equipment segment		221			3,573			-
Gain on sale of facility		-			(3,198	)		-
Gain on disposal of video camera segment		-			-			(4,434	)
Operating cash flows of discontinued operations		-			(1,039	)		9,466
Depreciation and amortization		10,412			11,273			12,607
Share-based compensation expense		7,143			6,755			6,388
Accrued retiree benefits		672			2,185			787
Deferred income taxes		(1,065	)		222			832
Other assets		415			(326	)		-
Loss on disposal and impairment of fixed assets		31			311			-
Other accrued liabilities		162			127			-
Changes in current assets and liabilities, excluding effects from acquisitions and divestitures:
Accounts receivable		(4,617	)		8,970			(18,656	)
Inventories		4,608			(5,743	)		(3,401	)
Accrued compensation, warranty and other liabilities		(1,544	)		(3,740	)		6,218
Accounts payable		5,678			3,376			139
Deferred profit		3,309			(3,108	)		2,181
Other current assets		(1,959	)		2,420			(1,294	)
Income taxes payable		(1,957	)		(828	)		137
Net cash provided by operating activities		24,548			21,480			19,678
Cash flows from investing activities, excluding effects from acquisitions and divestitures:
Purchases of short-term investments		(50,568	)		(656	)		(1,000	)
Sales and maturities of short-term investments		20,230			155			1,045
Net cash received from sale of facility and assets		874			33,314			-
Purchases of property, plant and equipment		(3,452	)		(6,586	)		(1,457	)
Net cash received from disposition of microwave equipment segment		-			4,881			-
Net cash received from sale of video camera segment		-			-			10,258
Investing cash flows of discontinued operations		-			(74	)		(209	)
Net cash provided by (used in) investing activities		(32,916	)		31,034			8,637
Cash flows from financing activities:
Cash dividends paid		(6,351	)		(6,215	)		(6,067	)
Net cash provided by (used in) issuance of common stock through employee equity incentive plans		(356	)		1,233			1,891
Net cash used in financing activities		(6,707	)		(4,982	)		(4,176	)
Effect of exchange rate changes on cash and cash equivalents		(4,250	)		(3,047	)		(4,922	)
Net increase (decrease) in cash and cash equivalents		(19,325	)		44,485			19,217
Cash and cash equivalents at beginning of year		115,370			70,885			51,668
Cash and cash equivalents at end of year	$	96,045		$	115,370		$	70,885

Supplemental disclosure of cash flow information:
Cash paid (refunded) during the year for income taxes	$	6,808		$	(253	)	$	971
Inventory capitalized as capital assets	$	201